Friday, June 20, 2014

ASME B31.3 - 2012 Process Piping, Publisher: ASME, ISBN: 9780791834213, Language: English, Print-Book

Detalhes


Prazo de entrega entre 3 a 4 semanas.

O recebimento de encomendas internacionais está sujeito a procedimentos aduaneiros e isto pode causar atrasos além do tempo estimado de entrega.

Product Details

Publisher: ASME
Publish Date: 2012
Pages: 540
Language: English
ISBN: 9780791834213
Description

ASME has been defining piping safety since 1922.

ASME B31.3 contains requirements for piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals.  It covers materials and components, design, fabrication, assembly, erection, examination, inspection, and testing of piping.

This Code applies to piping for all fluids including: (1) raw, intermediate, and finished chemicals; (2) petroleum products; (3) gas, steam, air and water; (4) fluidized solids; (5) refrigerants; and (6) cryogenic fluids.  Also included is piping which interconnects pieces or stages within a packaged equipment assembly.

Key changes to this revision include updating Table A-1 Basic Allowable Stresses in Tension for Metals in its entirety, adding Table A-1M Basic Allowable Stresses in Tension for Metals in metric units, adding Table A-2M Design Stress Values for Bolting Materials in metric units, adding metric units to Appendix H Sample Calculations for Branch Reinforcement, and adding a new Appendix N on Application of ASME B31.3 Internationally.

B31.3 is one of ASME’s most popular codes, widely adopted by jurisdictions worldwide.  It serves as a companion to ASME’s B31.1 Code on Power Piping as well as to the other codes in ASME’s B31 series.  Together, they remain essential references for anyone engaged with piping. 

Careful application of these B31 codes will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

Intended for manufacturers, users, constructors, designers, and others concerned with the design, fabrication, assembly, erection, examination, inspection, and testing of piping, plus all potential governing entities.

Table of Contents

Foreword 

Committee Personnel 
Introduction 
Summary of Changes 
Chapter I - Scope and Definitions 
Chapter II - Design 
Part 1 - Conditions and Criteria 
Part 2 - Pressure Design of Piping Components 
Part 3 - Fluid Service Requirements for Piping 
 Components 
Part 4 - Fluid Service Requirements for Piping 
 Joints 
Part 5 - Flexibility and Support 
Part 6 - Systems 
Chapter III - Materials 
Chapter IV - Standards for Piping Components 
Chapter V - Fabrication, Assembly, and Erection 
Chapter VI - Inspection, Examination, and Testing 
Chapter VII - Nonmetallic Piping and Piping Lined 
 With Nonmetals 
Part 1 - Conditions and Criteria 
Part 2 - Pressure Design of Piping Components 
Part 3 - Fluid Service Requirements for Piping 
 Components 
Part 4 - Fluid Service Requirements for Piping Joints 
Part 5 - Flexibility and Support 
Part 6 - Systems 
Part 7 - Materials 
Part 8 - Standards for Piping Components 
Part 9 - Fabrication, Assembly, and Erection 
Part 10 - Inspection, Examination, and Testing 
Chapter VIII - Piping for Category M Fluid Service 
Part 1 - Conditions and Criteria 
Part 2 - Pressure Design of Metallic Piping Components 
Part 3 - Fluid Service Requirements for Metallic Piping  
 Components 
Part 4 - Fluid Service Requirements for Metallic Piping  
 Joints 
Part 5 - Flexibility and Support of Metallic Piping 
Part 6 - Systems 
Part 7 - Metallic Materials 
Part 8 - Standards for Piping Components 
Part 9 - Fabrication, Assembly, and Erection of Metallic  
 Piping 
Part 10 - Inspection, Examination, Testing, and Records 
 of Metallic Piping 
Part 11 - Conditions and Criteria 
Part 12 - Pressure Design of Nonmetallic Piping  
 Components 
Part 13 - Fluid Service Requirements for Nonmetallic 
 Piping Components 
Part 14 - Fluid Service Requirements for Nonmetallic  
 Piping Joints 
Part 15 - Flexibility and Support of Nonmetallic Piping 
Part 16 - Nonmetallic and Nonmetallic Lined Systems 
Part 17 - Nonmetallic Materials 
Part 18 - Standards for Nonmetallic and Nonmetallic Lined  
 Piping Components 
Part 19 - Fabrication, Assembly, and Erection of Nonmetallic  
 and Nonmetallic Lined Piping 
Part 20 - Inspection, Examination, Testing, and Records of  
 Nonmetallic and Nonmetallic Lined Piping 
Chapter IX - High Pressure Piping 
Part 1 - Conditions and Criteria 
Part 2 - Pressure Design of Piping Components 
Part 3 - Fluid Service Requirements for Piping Components 
Part 4 - Fluid Service Requirements for Piping Joints 
Part 5 - Flexibility and Support 
Part 6 - Systems 
Part 7 - Materials 
Part 8 - Standards for Piping Components 
Part 9 - Fabrication, Assembly, and Erection 
Part 10 - Inspection, Examination, and Testing 
Chapter X - High Purity Piping 
Part 1 - Conditions and Criteria 
Part 2 - Pressure Design of Piping Components 
Part 3 - Fluid Service Requirements for Piping Components 
Part 4 - Fluid Service Requirements for Piping Joints 
Part 5 - Flexibility and Support 
Part 6 - Systems 
Part 7 - Metallic Materials 
Part 8 - Standards for Piping Components 
Part 9 - Fabrication, Assembly, and Erection 
Part 10 - Inspection, Examination, and Testing 
Part 11 - High Purity Piping in Category M Fluid Service 
Appendices 
A - Allowable Stresses and Quality Factors for Metallic  
 Piping and Bolting Materials 
B - Stress Tables and Allowable Pressure Tables for Nonmetals 
C - Physical Properties of Piping Materials 
D - Flexibility and Stress Intensification Factors 
E - Reference Standards 
F - Precautionary Considerations 
G - Safeguarding 
H - Sample Calculations for Branch Reinforcement 
J - Nomenclature 
K - Allowable Stresses for High Pressure Piping 
L - Aluminum Alloy Pipe Flanges 
M - Guide to Classifying Fluid Services 
P - Alternative Rules for Evaluating Stress Range 
Q - Quality System Program 
S - Piping System Stress Analysis Examples 
V - Allowable Variations in Elevated Temperature Service 
X - Metallic Bellows Expansion Joints 
Z - Preparation of Technical Inquiries 
Index