VDA Technical Standards Best Selling \ Top Selling Products 2011

VDA 230-201 has been replaced by VDA 230-213 .

VDA 230-202 has been replaced by VDA 230-213 .

VDA 230-205
Automotive Leather
Determination loose grain effect
(04/2005)

VDA 230-206
Examination of the stick-slip behaviour of material parts
english/german
(11/2007)

VDA 230-208
Leather and Plastic Roll Stock for Motor Vehicle Interior Trim - Hydrolytic Aging
english/german
(05/2008)

VDA 230-209
Leather and Plastic Roll Stock and Textiles for Motor Vehicle Interior Trim - Hydrolytic Aging
english/german
(05/2008)

VDA 230-210
Upholstery Fabric - Hook and loop fastener test
english/german
(12/2008)

VDA 230-211
Abrasion Test on Leather
Determination of the abrasion resistance of leather surfaces using the Martindale abrasion test apparatus and a ball plate
english/german
(07/2008)

VDA 230-212
Leather, plastic roll stock and textiles for use in vehicles
Determining the soiling and cleaning properties process using soiled fabric
english/german
(07/2010)

VDA 230-213
Test procedures for the product classes
Prelube, Prelube2, Hotmelt, Spot lubricant
english/german
(11/2008)

VDA 230-214
Resistance of metallic materials to condensate corrosion n exhaust gas-carrying components - Testing methods
english/german
(06/2010)

VDA 231-200
Material record
Specification of materials and finishes in IT systems
english/german
(09/2010)

VDA 232-101
Global Automotive Declarable Substance List /
english
(02/2011)

VDA 236-101
Requirements and boundary conditions for the use of X-ray computed tomography in the automotive industry
(english/german/french)
(11/2008)

VDA 238-100
Plate bending test for metallic materials
(english/german)
(12/2010)

VDA 240-300
Specification of Automotive Hard Disc Drives
english/german
(08/2010)

VDA 240-301
Test Case Book of Automotive Hard Disc Drives
english/german
(08/2010)

VDA 240-310
Specification of Automotive Drives
english/german
(08/2010)

VDA 240-311
Test Case Book of Automotive Drives - Draft
english/german
(08/2010)

VDA 260
Components of motor vehicles
Marking of material
(04/2007) 

VDA 270
Determination of the odour characteristics in motor vehicles
(10/1992)

VDA 280-1
Colorimetry for motor vehicles
Colour measuring of plastic surfaces of interior materials for motor vehicles
(04/2001)

VDA 280-2
Colorimetry for motor vehicles
Colour measurement of textiles
(04/2001)

VDA 280-3
Colorimetry for motor vehicles
Colour measurement of automotive paint finishes Solid paints
(04/2001)

VDA 280-4
Colorimetry for motor vehicles
Colour measurement of automotive paint finishes Goniochromatic paints
(04/2001)

VDA 280-5
Colour measurement for motor vehicles
Calibration of Colour measurement instruments that measure reflection
(05/1999)

VDA 2005 inclusive Appendix 1
Geometrical Product Specifications
Technical Drawings - Specification of Surface Texture
(02/2007)

VDA 2006
Geometrical Product Specifications
Surface Texture - Rules and Procedures for the Assessment of Surface Texture
(07/2003)

VDA 2007
Geometrical Product Specifications
Surface Texture - Definitions and Characteristic Values of the Dominant Waviness
(02/2007)

VDA 2008
Geometrical Surface
Specifications - Surface Texture "Robust Gaussian Regression Filter" Definition and Application
(02/2007)

VDA 2020
Automotive Glazing
Glass Thickness
(06/2006)

VDA Specification for Car Hands-free Terminals
- Version 1.6 (Draft) - german/english
(11/2008)

VDA Standards in german language

VDA 220
Standardaufheizung für Pkw mit 1 bis 2 Sitzreihen bei Niedriglastfahrzustand 50 km/h,
ebene Strasse und Kaltstarttemperatur von -20 C
(03/2005)

VDA 230-203
Prüfverfahren für Textilien in der Automobilindustrie
(05/2008)

VDA 230-204 Schichtdickenmessung
Bestimmung der Zurichtungsstärke auf Leder 
(04/2005)

VDA 230-205
Leder für die Kraftfahrzeuginnenausstattung
Bestimmung des Losnarbigkeitseffekts
(04/2005)

VDA 230-207 Beständigkeit gegen Korrosion metallischer Werkstoffe durch Kraftstoffe
(01/2008)

VDA 230-212
Leder, Kunststoffbahnenwaren und Textilien für Kraftfahrzeuge - Bestimmung des Anschmutz- und Reinigungsverhaltens - Verfahren mit Anschmutzgewebe
(06/2009)

VDA 231-02
Schmiedestähle (05/1989)

VDA 231-106 Werkstoff-Klassifizierung im Kfz
(01/1997)

VDA 232-102
Deklaration von Inhaltsstoffen in Bauteilen und Werkstoffen für den Automobilbau
(02/2008)

VDA 232-201
Kennwerte zur Werkstoffauswahl von Thermoplasten im Innenraum, Motorraum und Aussenbereich (09/2008)

VDA 233-101
Korrosionsschutzanforderungen
(10/2004)

VDA 235-101 Schmieren von mech.Verbindungselementen
(08/1999)

VDA 235-102
Oberflächenschutzarten für Verbindungselemente...
(01/1996)

VDA 235-103
Cr(VI)-freie Oberflächenschutzarten für Schrauben in Blech, Kunststoff und Holz
(05/2005)

VDA 235-104 Cr(VI)-freie Oberflächenschutzarten für Verbindungselemente mit metrischem Gewinde (01/2007)

VDA 235-201
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl; Schrauben (03/1999)

VDA 235-202
Mechanische Eigenschaften von Verbindungselementen der Festigkeitsklasse 800 K
(10/2001)

VDA 235-203
Verschraubungsverhalten / Reibungszahlen
(08/2005)

VDA 237-101
Prüfverfahren für Folien und Kunstleder
(01/1996)

VDA 237-299
Oberflächenschutz für Bremssättel aus Gusseisen
(11/2005)

VDA 240-100
Planung und Anwendung der Gebäudeautomation inkl. Gebäudeleittechnik in der Automobilindustrie (01/2005)

VDA 240-200
Spezifikation für Fahrzeug-Antennen
Funktionsanforderungen, Messmethoden
- Entwurf -
(01/2005)

VDA 250
Werkstofflaborbewertung
(06/2009)

VDA 260
Bauteile von Kraftfahrzeugen Kennzeichnung von Werkstoffen
(04/2007)

VDA 261
Fahrzeugverglasung
(08/1996)

VDA 262
Umstellung ... auf  ISO
Schlüsselweiten
(12/1985)

VDA 263 - Abnahmeprüfung von Pkw-Getrieben
(03/1999)

VDA 264 - Handlungsabfolge Korrelation Getriebegeräusch
(09/2003)

VDA 265
Bestimmung des Anteils hochsiedender Komponenten im Ottokraft-stoff mittels Gaschromatographie (09/2008)

VDA 270
Bestimmung des Geruchsverhaltens von Werkstoffen
(10/1992)

VDA 275 - Formteile für den Fahrzeuginnenraum
(07/1994)

VDA 276
Bestimmung organischer Emissionen aus Bauteilen für den Kfz-Innenraum mit einer 1 m³-Prüfkammer (03/2000)

VDA 277 - Nichtmetallische Werkstoffe der Kfz-Innenausstattung - Bestimmung der Emission organischer Verbindungen
(01/1995)

VDA 278 Thermodesorptionsanalyse organischer
Emissionen zur Charakterisierung von nichtmetallischen Kfz-Werkstoffen (09/2002) 60,00

VDA 280/1 - Farbmessung am Kraftfahrzeug - Farbmessung von Kunststoffoberflächen
im Innenraum
(04/2001)

VDA 280/2 - Farbmessung im Kraftfahrzeug - Farbmessung von Textilien im Kfz
(04/2001)

VDA 280/3 - Farbmessung am Kraftfahrzeug - Farbmessung von Automobillackierungen - Unilackierungen (04/2001)

VDA 280/4
Farbmessung am Kraftfahrzeug - Farbmessung von Automobillackierungen - Effektlackierungen
(04/2001)

VDA 280/5 Farbmessung am Kraftfahrzeug - Kalibrierung von Farbmeßgeräten für Reflexionsmessungen (08/1998)

VDA 280/6 A Farbmessung am Kraftfahrzeug - Farbmessung an Fahrzeuggläsern im sichtbaren
Spektralbereich - Farbmessung an Scheiben im Bereich der nicht-transparenten Beschichtungen
(12/2006)

VDA 280/6 B
Farbmessung am Kraftfahrzeug - Farbmessung an Fahrzeuggläsern im sichtbaren Spektralbereich - Farbmessung an Scheiben im transparenten Bereich in Reflexion
(12/2006) 

VDA 280/6 C Farbmessung am Kraftfahrzeug - Farbmessung an Fahrzeuggläsern im sichtbaren
Spektralbereich - Farbmessung an Spiegeln in Reflexion
(12/2006)

VDA 280/6 D Farbmessung am Kraftfahrzeug - Farbmessung an Fahrzeuggläsern im sichtbaren
Spektralbereich - Farbmessung an Gläsern und Spiegeln mitrichtungsabhängigen Effekten
(04/2008)

VDA 280/7
Farbmessung am Kraftfahrzeug - Verfahren zur Erarbeitung empfindungsgemäßer Farbtoleranzen mittels visueller Abmusterungen
(05/2008)

VDA 285-1
Scheibenbremsbeläge
(12/2003)

VDA 2005
inklusive Beiblatt 1 Geometrische Produktspezifikation Technische Zeichnungen - Angabe der Oberflächenbeschaffenheit
(02/2007)

VDA 2006 Geometrische Produktspezifikation Oberflächenbeschaffenheit - Regeln und
Verfahren zur Beurteilung der Oberflächenbeschaffenheit
(07/2003)

VDA 2007
Geometrische Produktspezifikation Oberflächenbeschaffenheit - Definitionen und Kenngrößen der dominanten Welligkeit
(02/2007)

VDA 2008
Geometrische Produktspezifikation Oberflächenbeschaffenheit Robustes Gauss`sches Regressionsfilter
Definition und Anwendung
(02/2007)

VDA 2009
Geometrische Produktspezifikation Oberflächenbeschaffenheit
Winkelaufgelöste Streulichtmesstechnik Definition, Kenngrößen und Anwendung
(07/2010)

VDA 2020
Autoverglasung Glasdicken
(06/2006)

VDA
Liefervorschrift für die elektrische Ausrüstung...
(02/2001)

VDA-Richtlinie
"GSM-Funktelefone" (12/1997)

We’re always ready to help you out.

Entre em contato e Solicite seu orçamento:

Technos Publicações

Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

VDA Richtlinie 67 Elastomere (Loseblattsammlung \ Loseblattwerk im Ringordner) 2011 -- TO BE RELEASED ON NOVEMBER 2011, Best Selling \ Top Selling Products \ Standard Coming Soon *** PRE ORDER ***

VDA 67 recommendation has to be revised.

Pre-order a Standard and we'll ship it to you as soon as it's released

VDA Richtlinie 67 Elastomere  ( Loseblattsammlung \ \ Loseblattwerk im Ringordner ) is available, in German only.

We’re always ready to help you out.

Entre em contato e Solicite seu orçamento:

Technos Publicacoes
Telefone: 55-11-9911-26650

Site: http://www.technospub.com.br/

Email: info@technospub.com.br

Facebook http://www.facebook.com/Technospub

Twitter http://www.twitter.com/Technospub

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

IMF E-LIBRARY - INTERNATIONAL MONETARY FUND E-LIBRARY ( IMF Statistics ; Periodicals and Reports ; Books and Analytical Papers and A Full pictures of IMF activities ) ; Best Selling \ Top Selling Products 2011

IMF's eLibrary—find in-depth, independent analysis on the financial crisis, development, macroeconomics, poverty reduction, trade, globalization, and so much more.

Collections 　
　

IMF Statistics
Authorative IMF data and research resources delivered through online tools.
International Financial Statistics, Direction of Trade, Balance of Payments, Government Finance Statistics, Statistical yearbooks.
- Balance of Payments Statistics
- Direction of Trade Statistics
- Government Finance Statistics
- International Financial Statistics
- Technical Manuals and Guides

Periodicals and Reports
Nothing compares to our reports on where the global economy has been and may be heading.
World Economic Outlook, Regional Economic Outlooks, Global Financial Stability Report, Annual 　Report on Exchange Arrangements and Exchange Restrictions, Finance & Development, IMF Survey, 　Fund Annual Reports and Independent Evaluation Office Reports.
- Annual Report on Exchange Arrangements and Exchange Restrictions
- Fiscal Monitor
- Global Financial Stability Report
- Regional Economic Outlook reports
-World Economic Outlook

Books and Analytical Papers
Gain access to our thought leadership, unique studies, and important research.
IMF Books, Working Papers and Country Reports.
- Books
- Country Reports - Departmental Papers
- Glossaries - Occasional Papers
- Pamphlets - Seminar Volumes - Special Issues
- Working Papers

A full picture of IMF activities

- Annual Report of the Executive Board
- Articles of Agreement
- By-Laws, Rules, & Regulations
- Finance & Development magazine
- Independent Evaluation Office reports
- IMF Survey
- Summary Proceedings

We’re always ready to help you out.

Entre em contato e Solicite seu orçamento:

Technos Publicacoes
Telefone: 55-11-9911-26650

Site: http://www.technospub.com.br/

Email: info@technospub.com.br

Facebook http://www.facebook.com/Technospub

Twitter http://www.twitter.com/Technospub

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

Consensus Economics - World's Leading Macroeconomic Survey Firm - Best Selling \ Top Selling Products 2011 ( Consensus Forecasts - G-7 & Western Europe ; Asia Pacific Consensus Forecasts ; Eastern Europe Consensus Forecasts ; Latin American Consensus Forecasts ; Foreign Exchange Consensus Forecasts ; Energy & Metals Consensus Forecasts ; Consensus Forecasts - USA ; Current Economics - Non-Academic Journal )

World's Leading Macroeconomic Survey Firm

Established in London in 1989, Consensus Economics prepares monthly compilations of country economic forecasts and topical analyses covering the G-7 industrialised nations, Asia Pacific, Eastern Europe, Latin America, as well as specialised publications on Foreign Exchange Forecasts and Energy and Metal price forecasts. Over the past two decades Consensus Economics has cultivated a growing network of economists, drawing upon the expertise of well-established local consultancies and large teams of professionals in the banks who are dedicated to particular countries and regions.

Consensus Economics is often seen as the macroeconomic forecast benchmark by investment and planning managers, as well as government and public sector institutions, who find our data effective, timely and accurate. Each publication produced by Consensus Economics shows consensus forecasts, as well as individual forecaster predictions, and is distributed in hard-copy format and via email as PDF files and Excel spreadsheets.

Publications & Services

- Consensus Forecasts - G-7 & Western Europe

- Asia Pacific Consensus Forecasts

- Eastern Europe Consensus Forecasts

- Latin American Consensus Forecasts

- Foreign Exchange Consensus Forecasts

- Energy & Metals Consensus Forecasts

- Consensus Forecasts - USA

- Current Economics - Non-Academic Journal

Delivery Methods

Hardcopy

All subscribers to our publications are sent printed hard copies by first-class mail. For those who wish to receive publications electronically "upon release" we offer in addition e-mailed PDF and Excel files. Site Licenses for broader distribution and historical survey data back to 1989 are also available.

E-mail Delivery (in PDF format)

PDF delivery is available for a supplement cost per year in addition to the cost of a hard-copy subscription. We do not offer an 'e-mail only' service. UK and certain European Union subscribers to the e-mail service may also be charged Value Added Tax.

E-mail Delivery (in Excel format)

Most of the survey data from each of our four regional publications can be received in Excel spreadsheet format by email under license from Consensus Economics. The historical spreadsheet services include forecasts from our previous monthly surveys dating back as far as October 1989 plus, at the user's option, a one-year subscription to future monthly spreadsheet updates by e-mail, including a mailed hard copy of the publication going forward. License Agreements for historical data allow back-testing of forecast accuracy and modelling of country indicator expectations.

Site Licenses

Consensus Economics site licenses enable subscribers to distribute either PDF files or Excel Spreadsheets to a broader audience via their internal email systems or intranets, thereby adding to available knowledge resources and facilitating the management process. Site licenses can be individually tailored to suit specific needs considering both the number of end-users and their physical locations. If you would like to receive a quotation, please contact us and let us know how many people in your organisation would have access to the data. We can then send you a proposal.

Data Service Platforms

In addition to receiving the historical and current survey data directly from Consensus Economics, these databases are also available as premium services, on CEIC Data, on Factset and on Thomson Reuters Datastream electronic research platforms. For further information about these services, please contact Consensus Economics.

We’re always ready to help you out.

Simply email info@technospub.com.br or fax us with your complete address and we will invoice you for the one year subscription price. A copy of your subscription form can be printed, faxed or emailed to us.

Entre em contato e Solicite seu orçamento:

Technos Publicacoes
Telefone: 55-11-9911-26650

Site: http://www.technospub.com.br/

Email: info@technospub.com.br

Facebook http://www.facebook.com/Technospub

Twitter http://www.twitter.com/Technospub

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

World Energy Outlook 2011 -- TO BE RELEASED ON 9 NOVEMBER 2011, Best Selling \ Top Selling Products

TO BE RELEASED ON 9 NOVEMBER 2011, 600 pages,Paper copy
PDF single user
PDF multi licences
CDs and on-line service

What will the price of oil mean for the fragile economic recovery? Will factors including geopolitical unrest, price volatility and policy uncertainty defer investment and heighten the risk to our energy security? Is the gap between our climate actions and our climate goals becoming insurmountable? World Energy Outlook 2011 tackles these and other pressing questions.

The latest data, policy developments, and the experience of another remarkable year, are brought together to provide robust analysis and insight into global energy markets. WEO-2011 once again gives detailed energy demand and supply projections out to 2035, broken down by region, fuel, sector and scenario. This year it also gives a special focus to topical energy sector issues:

- Just how likely might a "Golden Age of Gas" be? (special early report released 6 June 2011 )
- Investment and financing options to achieve modern energy access for all (special excerpt released 10 October 2011 )
- Climate change –"lock-in" & the "room to manoeuvre" to meet the 2oC goal
- Russian energy prospects and their implications for global markets
- The role of coal in driving economic growth in an emissions-constrained world
- The growing inter-linkages between energy and water and
- Reforms to fossil fuel subsidies and support for renewable energy

Type: Studies
Subject: Climate Change ; Coal ; Energy Projections ; Oil

We’re always ready to help you out.

Entre em contato e Solicite seu orçamento:

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

Para maiores informações:

Por favor, entre em contato:

Email: jhecker@uol.com.br
Linkedin: heckerjf
Twitter: @heckerjf
Facebook: PubIntl

A Chave do Aço 2010 ; Stahlschlüssel - Stahlschlussel ( Key to Steel ) ; ( La clé des aciers ) ; 22 Edição ; 22nd Edition 2010 ; ( Trilíngue : Inglês ; Francês , Alemão ) ; Livro ou CD-ROM ; Best Selling \ Top Selling Products 2011 ; ( ISBN: 3922599265 ; ISBN-13 : 9783922599265 ; ISBN-13 : 9783922599272 ) ; Original Standard , Norma Original ; Equivalente Materiais

Edição: 22ª Edição
Data de Publicação: 2010

Número de Páginas: 790

Editor: C.W. Wegst
ISBN: 3922599265
ISBN-13 : 9783922599265
Acabamento: Capa Dura

Também disponível em CD-ROM:
- Usuário Simples: Uso Local
- Usuário Simples: Em rede
- Múltiplos Usuários: Multiusuários
- ISBN13: 9783922599272

A chave do Aço é um livro de referência para decodificar / decifrar designações de aço e encontrar materiais equivatentes em todo o mundo. A edição 2010 inclui mais de 70.000 designações, normas e nomes comerciais de aproximadamente 300 siderúrgicas e fornecedores. Edição trilíngue: Inglês, Francês e Alemão.

Entidades Normativas Referenciadas:

ACI · AFNOR NF · AISI · AMS · AS/NZS · ASME · ASTM · AWS · BDS · BS · CSA · CŠN · EN · FEDERAL · GB · GOST · IS · ISC · ISO · JB · JIS · KS · MIL · MSZ · NBN · NS · ÖNORM · PN · SAE · SNV · SRPS (JUS) · SS · STAS/SR · STN · UNE · UNI · UNS · VSM; YB · EURONORM.

Normas e designações de 25 países:

Alemanha, Austrália, Áustria, Brasil, Bulgária, Canadá, China, Coréia, Espanha, Estados Unidos, Finlândia, França, Hungría, India,  Inglaterra, Italia, Japão, Noruega, Polonia, Reino Unido, República Checa, Romênía, Russia, Sérvia e Suécia.

Indispensável para: 

- Compradores
- Engenheiros Mecânicos
- Designers
- Produção
- Departamento de Exportação
- Comerciante Técnico
- Empregado de Armazém
- Departamento de Normas
- Departamento de Tratamanto de Metais
- Lojistas
- Departamento de Testes de Materiais
- Todos aqueles que trabalham com aço

Para maiores informações:

Por favor, entre em contato:

Email: jhecker@uol.com.br

Linkedin: heckerjf

Twitter: @heckerjf

Facebook: PubIntl

Best Selling \ Top Selling Products NFPA Standards 2011 - National Fire Protection Association - ( Original Standard , Norma Original ) ; NFPA 1 Fire Code ; NFPA 10: Standard for Portable Fire Extinguishers ; NFPA 13 Standard for the Installation of Sprinkler Systems ; NFPA 54 National Fuel Gas Code ; NFPA 58, National Fire Codes ; NFPA 58: Liquefied Petroleum Gas Code, 2011 Edition ; NFPA 70 National Electrical Code ; NFPA 72 National Fire Alarm and Signaling Code Handbook ; NFPA 85 Boiler and Combustion Systems Hazards Code ; NFPA 99 Health Care Facilities Handbook ; NFPA 101 Life Safety Code ; NEC Analysis of Changes

NFPA 1: Fire Code, 2009 Edition

NFPA 1: Fire Code Handbook, 2009 Edition

NFPA 10: Standard for Portable Fire Extinguishers, 2010 Edition

NFPA 13: Automatic Sprinkler Systems Handbook, 2010 Edition

NFPA 13: Standard for the Installation of Sprinkler Systems, 2010 Edition

NFPA 54: National Fuel Gas Code, 2009 Edition

NFPA 58: Liquefied Petroleum Gas Code, 2011 Edition

NFPA 58: LP-Gas Code Handbook, 2011 Edition

NFPA 70®: National Electrical Code® (NEC®) Handbook, 2011 Edition

NFPA 70®: National Electrical Code® (NEC®) Looseleaf, 2011 Edition

NFPA 70®: National Electrical Code® (NEC®) Softbound, 2011 Edition

NFPA 70B: Recommended Practice for Electrical Equipment Maintenance, 2010 Edition

NFPA 70E®: Handbook for Electrical Safety in the Workplace, 2009 Edition

NFPA 70E®: Standard for Electrical Safety in the Workplace®, 2009 Edition

NFPA 72®: National Fire Alarm and Signaling Code Handbook, 2010 Edition

NFPA 72®: National Fire Alarm and Signaling Code, 2010 Edition

NFPA 85: Boiler and Combustion Systems Hazards Code, 2011 Edition

NFPA 99: Health Care Facilities Handbook, 2005 Edition

NFPA 99: Standard for Health Care Facilities, 2005 Edition

NFPA 99C: Standard on Gas and Vacuum Systems, 2005 Edition

NFPA 101®: Life Safety Code® Handbook, 2009 Edition

NFPA 101®: Life Safety Code®, 2009 Edition

NFPA 921: Guide for Fire and Explosion Investigations, 2011 Edition

National Fire Codes® Softbound Set, 2011 Edition

National Fire Codes® Softbound Set, 2011 Edition

Fire Alarm Signaling Systems, 2010 Edition

Fire Protection Handbook®, 2008 Edition

NEC® Analysis of Changes, 2011 Edition

---------------------------------------------------------------------------------

If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.

If you would like to request an invoice, please send us an email message.

We’re always ready to help you out.

---------------------------------------------------------------------------------

Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações.

Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.

Estamos sempre prontos a ajudá-los.

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

Best Selling \ Top Selling BSI Standards 2011 - British Standards Institute - ( Original Standard , Norma Original ) ; BS 499-1:2009 ; BS 5266-1:2005 ; BS 5839-1:2002+A2:2008 ; BS 6180:2011 ; BS 7000-2:2008 ; BS 7671:2008 ; BS 7858:2006+A2:2009 ; BS 7907:2007 ; BS 7910:2005 ; BS 8300:2009+A1:2010 ; BS 8901:2009 ; BS 8666:2005 ; BS 25999-1:2006 ; BS EN 1011-1:2009 ; BS EN 1991-1-4:2005+A1:2010 ; BS EN 1992-1-1:2004 ; BS EN 1993-1-9:2005 ; BS EN 1993-1-10:2005 ; BS EN 1995-1-1:2004+A1:2008 ; BS EN 1995-1-2:2004 ; BS EN 10028-1:2007+A1:2009 ; BS EN 10028-7:2007 ; BS EN 10253-2:2007 ; BS EN 55022:2006+A2:2010 ; BS EN 55022:2006+A2:2010 ; BS EN 60079-2:2007 ; BS EN 60079-14:2008 ; BS EN ISO 2081:2008 ; BS EN ISO 2082:2008 ; BS EN ISO 9001:2008 ; BS EN ISO 14001:2004 ; BS EN ISO 17637:2011 ; BS ISO 26000:2010 ; BS ISO/IEC 27001:2005/BS 7799-2:2005 ; BS ISO/IEC 27031:2011 ( Replace: BS 25777:2008 ) ; BS OHSAS 18001:2007 ; BS OHSAS 18002:2008 ; BIP 2207:2010 ; BIP 3083:2009 ; PD 1000:2003 - Universal decimal classification. Abridged edition ; PD 6697:2010 ; PD 5500:2009+A2:2010

BS 499-1:2009
Welding terms and symbols. Glossary for welding, brazing and thermal cutting
Status : Current Published : December 2008

BS 5266-1:2005
Emergency lighting. Code of practice for the emergency lighting of premises
Status : Current, Project Underway Published : December 2005

BS 5839-1:2002+A2:2008
Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance
Status : Current Published : October 2002

BS 6180:2011
Barriers in and about buildings. Code of practice
Status : Current Published : March 2011

BS 7000-2:2008
Design management systems. Guide to managing the design of manufactured products
Status : Current Published : March 2008

BS 7671:2008
Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition
Status : Current, Project Underway Published : January 2008

BS 7858:2006+A2:2009
Security screening of individuals employed in a security environment. Code of practice
Status : Current Published : August 2006

BS 7907:2007
Code of practice for the design and manufacture of children's clothing to promote mechanical safety
Status : Current Published : December 2007

BS 7910:2005
Guide to methods for assessing the acceptability of flaws in metallic structures
Published Date: 27/07/2005 Status: Current

BS 8300:2009+A1:2010
Design of buildings and their approaches to meet the needs of disabled people. Code of practice
Status : Current Published : February 2009

BS 8901:2009
Specification for a sustainability management system for events
Status : Current, Project Underway Published : September 2009

BS 8666:2005
Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification
Status : Current Published : September 2005

BS 25999-1:2006
Business continuity management. Code of practice
Status : Current Published : November 2006

BS EN 1011-1:2009
Welding. Recommendations for welding of metallic materials. General guidance for arc welding
Status : Current Published : March 2009

BS EN 1991-1-4:2005+A1:2010
Eurocode 1. Actions on structures. General actions. Wind actions
Status : Current Published : April 2005

BS EN 1992-1-1:2004
Eurocode 2: Design of concrete structures. General rules and rules for buildings
Status : Current Published : December 2004

BS EN 1993-1-9:2005
Eurocode 3. Design of steel structures. Fatigue
Status : Current Published : May 2005

BS EN 1993-1-10:2005
Eurocode 3. Design of steel structures. Material toughness and through-thickness properties
Status : Current, Work in hand Published : May 2005

BS EN 1995-1-1:2004+A1:2008
Eurocode 5. Design of timber structures. General. Common rules and rules for buildings
Status : Current Published : December 2004

BS EN 1995-1-2:2004
Eurocode 5. Design of timber structures. General. Structural fire design
Status : Current Published : December 2004

BS EN 10028-1:2007+A1:2009
Flat products made of steels for pressure purposes. General requirements
Status : Current Published : January 2008

BS EN 10028-7:2007
Flat products made of steels for pressure purposes. Stainless steels
Status : Current Published : January 2008

BS EN 10253-2:2007
Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
Status : Current Published : November 2007

BS EN 55022:2006+A2:2010
Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
Status : Current, Work in hand Published : November 2006

BS EN 60079-2:2007
Explosive atmospheres. Equipment protection by pressurized enclosure "p"
Status : Current Published : January 2008

BS EN 60079-14:2008
Explosive atmospheres. Electrical installations design, selection and erection
Status : Current Published : January 2009

BS EN ISO 2081:2008
Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
Status : Current Published : March 2009

BS EN ISO 2082:2008
Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
Status : Current Published : February 2009

BS EN ISO 9001:2008
Quality management systems. Requirements
Status : Current Published : November 2008

BS EN ISO 14001:2004
Environmental management systems. Requirements with guidance for use
Status : Current Published : November 2004

BS EN ISO 17637:2011
Non-destructive testing of welds. Visual testing of fusion-welded joints
Status : Current Published : March 2011

BS ISO 26000:2010
Guidance on social responsibility
Status : Current Published : November 2010

BS ISO/IEC 27001:2005/BS 7799-2:2005
Information technology. Security techniques. Information security management systems. Requirements
Status : Current Published : October 2005

BS ISO/IEC 27031:2011 ( Replace: BS 25777:2008 )
Information technology. Security techniques. Guidelines for information and communication technology readiness for business continuity
Status : Current Published : March 2011

BS OHSAS 18001:2007
Occupational health and safety management systems. Requirements
Status : Current Published : July 2007

BS OHSAS 18002:2008
Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007
Status : Current Published : November 2008

BIP 2207:2010
Building Information Management. A Standard Framework and Guide to BS 1192
Status : Current Published : August 2010

BIP 3083:2009
Graphical symbols for use in the labelling of medical devices CD-ROM
Status : Current Published : February 2009

PD 1000:2003
Universal decimal classification. Abridged edition
Status : Current Published : October 2003

PD 6697:2010
Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
Status : Current Published : November 2010

PD 5500:2009+A2:2010
Specification for unfired fusion welded pressure vessels
Status : Current Published : January 2009

Para maiores informações:

Por favor, entre em contato:

Email: jhecker@uol.com.br

Linkedin: heckerjf

Twitter: @heckerjf

Facebook: PubIntl

Best Selling \ Top Selling Standards at Publicacoes Internacionais 2011 - Original Standard , Norma Original ( ISO 9001 ; IPC A610 ; ISO 14971 ; ASME Y14.5 ; ASTM D4169 ; ISO 13485 ; 21CFR (800-1299) ; ASTM F88 ; ASQ Z1.4 ; ISO/IEC 17025 ; BS EN 980 ; IEC 60601-1 ; IPC/EIA J STD 001 ; ASTM A967 ; ASTM E18 ; ISO 10993-1 ; ISO 9000 ; BS EN 1041 ; IPC A600 ; ASTM F1980 ; AS 9100 ; ISO 15223-1 ; ISO 19011 ; 93/42/EEC ; ASTM A240 ; IEC 60601-1-2 )

ISO-9001
Quality management systems -- Requirements

IPC-A-610
Acceptability of Electronic Assemblies

ISO-14971
Medical devices -- Application of risk management to medical devices

ASME-Y14.5
Geometric dimensioning and tolerancing

ASTM-D4169
Standard Practice for Performance Testing of Shipping Containers and Systems

ISO-13485
Medical devices -- Quality management systems -- Requirements for regulatory purposes

21CFR(800-1299)
Code of Federal Regulations - Title 21--Food and Drugs (Parts 800 to 1299)

ASTM-F88
Standard Test Method for Seal Strength of Flexible Barrier Materials

ASQ-Z1.4
Sampling Procedures and Tables for Inspection by Attributes

ISO/IEC-17025
General requirements for the competence of testing and calibration laboratories

BS-EN-980
Symbols for use in the labelling of medical devices

IEC-60601-1
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IPC/EIA-J-STD-001
Requirements for Soldered Electrical and Electronic Assemblies

ASTM-A967
Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

ASTM-E18
Standard Test Methods for Rockwell Hardness of Metallic Materials

ISO-10993-1
Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process

ISO-9000
Quality management systems -- Fundamentals and vocabulary

BS-EN-1041
Information supplied by the manufacturer of medical devices

IPC-A-600
Acceptability of Printed Boards

ASTM-F1980
Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

AS-9100
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations

ISO-15223-1
Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements

ISO-19011
Guidelines for quality and/or environmental management systems auditing

93/42/EEC
Council Directive 93/42/EEC of 14 June 1993 concerning medical devices

ASTM-A240
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

IEC-60601-1-2
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

---------------------------------------------------------------------------------

If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.

If you would like to request an invoice, please send us an email message.

We’re always ready to help you out.

---------------------------------------------------------------------------------

Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações.

Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.

Estamos sempre prontos a ajudá-los.

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

Best Selling \ Top Selling Standards 2011 on Sampling and Statistical Process Control ( Original Standard , Norma Original )

ASQ-Z1.4, Sampling Procedures and Tables for Inspection by Attributes

ASQ-Z1.9, Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming

These 2 Standards replace MIL-STD-105 and MIL-STD-414, both of which are now obsolete. Filled with pages of tables for use with a continuous supply, the documents are our current best-selling sampling standards. The Z1.4 covers go/no go data, the Z1.9 covers measurement.

Zero Acceptance Number Sampling Plans is often used as an alternative to the MIL-STD-105/ASQ-Z1.4 Inspection systems. It is based on C=0 concept developed by author Nicholas Squeglia back in 1961. The 5th edition is the current revision of this item.

During the last few years, the ISO standards on this topic have seen greater usage as well. Top sellers include the ISO-2859 series, the ISO-11462 series, the ISO-3534 series, and the ISO-5725 series.

ISO-2859-10, Sampling procedures for inspection by attributes – Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes, is a good starting point for the ISO-2859 set. It provides a general introduction to acceptance sampling by attributes and provides a brief summary of the attribute sampling schemes and plans used in Parts 1 through 5. The standard also provides guidance on the selection of the appropriate inspection system for use in a particular situation.

ISO-11462-1, Guidelines for implementation of statistical process control (SPC) – Part 1: Elements of SPC, and ISO-11462-2, Guidelines for implementation of statistical process control (SPC) – Part 2: Catalog of Tools and Techniques, are two additional useful standards. They provide concepts, tools and techniques to help an organization in planning, implementation and evaluation of an effective statistical process control (SPC) system.

ISO-5725-1, Accuracy (trueness and precision) of measurement methods and results – Part 1: General principles and definitions, is an introduction to the ISO-5725 series. It outlines the general principles to be understood when assessing accuracy of measurement methods and results. It can also be used to establish practical estimations of the various measures by experiment. The standard may be applied to a very wide range of materials, including liquids, powders and solid objects, manufactured or naturally occurring.

For Statistics – Vocabulary and symbols, the ISO-3534 series covers all the bases:

ISO-3534-1, Part 1: General statistical terms and terms used in probability

ISO-3534-2, Part 2: Applied statistics

ISO-3534-3, Part 3: Design of experiments

ASTM International (formerly the American Society for Testing and Materials) also has a number of standards on the topic of Sampling and Statistical Process Control. We often sell the following:

ASTM-E122, Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process. This standard is intended for use in determining the sample size required to estimate, with specified precision, a measure of quality of a lot or process. The practice applies when quality is expressed as either the lot average for a given property, or as the lot fraction not conforming to prescribed standards.

Should you have any questions about the above standards, or need more suggestions to get the information you need, please contact us at vendas@technospub.com.br

---------------------------------------------------------------------------------

If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.

If you would like to request an invoice, please send us an email message.

We’re always ready to help you out.

---------------------------------------------------------------------------------

Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações.

Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.

Estamos sempre prontos a ajudá-los.

Technos Publicações

Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

Tags: ASQ-Z1.4, ASQ-Z1.9, ASQC-Z1.4, ASQC-Z1.9, ASTM E122, ASTM E122-09, Inspection, Inspection by Attributes, Inspection by Variables,Inspection for Percent Defective, Inspection for Percent Nonconforming,ISO-11462-1, ISO-11462-2, ISO-2859, ISO-2859-10, ISO-3534, ISO-3534-1, ISO-3534-2, ISO-3534-3, ISO-5725, ISO-5725-1, MIL-STD-105,MIL-STD-414, Sampling, Sampling Procedures, Sampling Procedures and Tables, Sampling Tables, spc books, SPC Standards, Statistical Process Control, statistical process control books, Zero Acceptance Number Sampling Plans

Best Selling \ Top Selling ASTM Standards 2011 ( Original Standard , Norma Original ) ; ASTM A240 / A240M - 11; ASTM A380 - 06 ; ASTM A967 - 05e2 ; ASTM B117 - 09 ; ASTM B633 - 07 ; ASTM D3359 - 09e2 ; ASTM D4169 - 09 ; ASTM E18 - 08 ; ASTM E165 - 09 ; ASTM E709 - 08 ; ASTM E1417 - 05e1 ; ASTM E1527 - 05 ; ASTM E1528 - 06 ; ASTM E2018 - 08 ; ASTM F88 / F88M - 09 ; ASTM F1980 - 07 )

ASTM A240 / A240M - 11 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

ASTM A380 - 06 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

ASTM A967 - 05e2 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

ASTM B117 - 09 Standard Practice for Operating Salt Spray (Fog) Apparatus

ASTM B633 - 07 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM D3359 - 09e2 Standard Test Methods for Measuring Adhesion by Tape Test

ASTM D4169 - 09 Standard Practice for Performance Testing of Shipping Containers and Systems

ASTM E18 - 08b Standard Test Methods for Rockwell Hardness of Metallic Materials

ASTM E165 - 09 Standard Practice for Liquid Penetrant Examination for General Industry

ASTM E709 - 08 Standard Guide for Magnetic Particle Testing

ASTM E1417 - 05e1 Standard Practice for Liquid Penetrant Testing

ASTM E1527 - 05 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process

ASTM E1528 - 06 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process

ASTM E2018 - 08 Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process

ASTM F88 / F88M - 09 Standard Test Method for Seal Strength of Flexible Barrier Materials

ASTM F1980 - 07 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

---------------------------------------------------------------------------------

If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.

If you would like to request an invoice, please send us an email message.

We’re always ready to help you out.

---------------------------------------------------------------------------------

Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações.

Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.

Estamos sempre prontos a ajudá-los.

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.

 

Best Selling \ Top Selling IEC Standards 2011 - Original Standard , Norma Original - ( IEC 61010 - 1 ed 3.0 : 2010 ; IEC 60529 - ed 2.1 : 2001 ; IEC 60068 - 2-30 ed 3.0 : 2005 ; IEC 61851 - 1 ed 2.0 : 2010 ; IEC 60068 - 2-6 ed 7.0 : 2007 ; IEC 61162 - 1 ed 4.0 : 2010 ; IEC 61000 - 4-2 ed 2.0 : 2008 ; IEC 60601 - 1 ed 3.0 : 2005 ; IEC 61508 - 3 ed 2.0 : 2010 ; IEC 61400 - 12-1 ed 1.0 : 2005 )

1. IEC 61010 - 1 ed 3.0 : 2010

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

2. IEC 60529 - ed 2.1 : 2001

Degrees of protection provided by enclosures (IP Code) 

3. IEC 60068 - 2-30 ed 3.0 : 2005

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

4. IEC 61851 - 1 ed 2.0 : 2010

Electric vehicle conductive charging system - Part 1: General requirements

5. IEC 60068 - 2-6 ed 7.0 : 2007

Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

6. IEC 61162 - 1 ed 4.0 : 2010

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

7. IEC 61000 - 4-2 ed 2.0 : 2008

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

8. IEC 60601 - 1 ed 3.0 : 2005

Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

 

9. IEC 61508 - 3 ed 2.0 : 2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements 

10. IEC 61400 - 12-1 ed 1.0 : 2005

Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines 

11. IEC 60068 - 2-14 ed 6.0 : 2009

Environmental testing - Part 2-14: Tests - Test N. Change of temperature

12. IEC 61508 - 2 ed 2.0 : 2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems 

13. IEC 62304 - ed 1.0 : 2006

Automatic test systems for battery powered emergency escape lighting

14. IEC 61508 - 1 ed 2.0 : 2010

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements

15. IEC 62301 - ed 2.0 : 2011

Household electrical appliances - Measurement of standby power

16. IEC 62660 - 1 ed 1.0 : 2010

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

17. IEC 61400 - 1 am1 ed 3.0 : 2010

Amendment 1 - Wind turbines - Part 1: Design requirements

18. IEC 61000 - 3-3 ed 2.0 : 2008

Electromagnetic compatibility (EMC) - Part 3-3: Limits 

19. IEC 61850 - 7-3 ed 2.0 : 2010

Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes

20. IEC 60079 - 15 ed 4.0 : 2010

Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

---------------------------------------------------------------------------------

If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.

If you would like to request an invoice, please send us an email message.

We’re always ready to help you out.

---------------------------------------------------------------------------------

Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações.

Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.

Estamos sempre prontos a ajudá-los.

---------------------------------------------------------------------------------

Authorized Subscription Agency - Booksellers - Information Consultant

---------------------------------------------------------------------------------

Tem alguma questão adicional? - Sinta-se livre em contactar-nos.