ASHRAE HANDBOOK -- FUNDAMENTALS (SI) - 2009 -(INCLUDES CD IN I-P AND SI EDITIONS)

Prazo de entrega entre 4 a 6 semanas.

ASHRAE HANDBOOK -- FUNDAMENTALS (SI) - 2009 -(INCLUDES CD IN I-P AND SI EDITIONS)

FULL DESCRIPTION

The 2009 ASHRAE Handbook: Fundamentals covers basic principles and data used in the HVAC&R industry. Updated with research sponsored by ASHRAE and others, this volume includes 1,000 pages and 39 chapters covering general engineering information, basic materials, climate data, load and energy calculations, duct and pipe design, and sustainability, plus reference tables for abbreviations and symbols, I-P to SI conversions, and physical properties of materials. An accompanying CD-ROM (included with the book-also sold separately) contains all the volume's chapters in both I-P and SI units.

PRODUCT DETAILS

Published: 2009

Number of Pages:880

ASHRAE HANDBOOK - REFRIGERATION (SI) - 2010 - (INCLUDES CD IN I-P AND SI EDITIONS) ENGLISH CD-ROM

Prazo de entrega entre 4 a 6 semanas.

ASHRAE HANDBOOK - REFRIGERATION (SI) - 2010 - (INCLUDES CD IN I-P AND SI EDITIONS) ENGLISH CD-ROM

FULL DESCRIPTION

The 2010 ASHRAE Handbook: Refrigeration covers the refrigeration equipment and systems for applications other than human comfort. This book includes information on cooling, freezing, and storing food; industrial applications of refrigeration; and low-temperature refrigeration. Primarily a reference for the practicing engineer, this volume is also useful for anyone involved in cooling and storage of food products.

An accompanying CD-ROM (also available for purchase separately) contains all the volume's chapters in both I-P and SI units.

This edition includes two new chapters: 

Chapter 3, Carbon Dioxide Refrigeration Systems, describes the history of this "natural refrigerant" and why it is the subject of renewed interest today. The chapter contains discussion and diagrams on CO2 refrigerant applications, system design, equipment, safety, lubricants, commissioning, operation, and maintenance.
Chapter 50, Terminology of Refrigeration, lists some of the common terms used in industrial refrigeration systems, particularly systems using ammonia as the refrigerant.

CD: Dual units

ASHRAE Handbook -- HVAC Applications (SI) - 2011 - (includes CD in I-P and SI editions) HANDBOOK / MANUAL / GUIDE

Prazo de entrega entre 4 a 6 semanas.

ASHRAE Handbook -- HVAC Applications (SI) - 2011 - (includes CD in I-P and SI editions) HANDBOOK / MANUAL / GUIDE 

The 2011 ASHRAE Handbook: HVAC Applications comprises over 60 chapters covering a broad range of facilities and topics, and is written to help engineers design and use equipment and systems described in other Handbook volumes. ASHRAE Technical Committees have revised nearly every chapter to cover current requirements, technology, and design practice. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units.

System requirements for 2011 ASHRAE Handbook: HVAC Applications CD

CD-ROM drive Adobe Reader 8 or higher Windows: Intel Pentium® III or equivalent processor Microsoft Windows XP Professional or Home, Windows Vista Home Basic, Home Premium, Ultimate, Business, or Enterprise with Service Pack 1 or 2 (32- or 64-bit editions), or Microsoft Windows 7 Starter, Home Premium, Professional, Ultimate, or Enterprise (32- or 64-bit) 256 MB of RAM 125 MB of available hard-disk space PDF viewing software Microsoft Internet Explorer 7.0 or higher Macintosh: Mac OS X v10.4.11 or higher 128 MB of RAM (256 MB recommended) 125 MB of available hard-disk space Firefox or Safari. CD: Dual units

PRODUCT DETAILS:

Published: 2011

Number of Pages:1102

2012 ASHRAE HANDBOOK -- HVAC SYSTEMS AND EQUIPMENT (I-P) - (INCLUDES CD IN I-P AND SI EDITIONS)/ENGLISH/HARDCOVER/CD-ROM/HANDBOOK / MANUAL / GUIDE

2012 ASHRAE HANDBOOK -- HVAC SYSTEMS AND EQUIPMENT (I-P) - (INCLUDES CD IN I-P AND SI EDITIONS)/ENGLISH/HARDCOVER/CD-ROM/HANDBOOK / MANUAL / GUIDE

The 2012 ASHRAE Handbook--HVAC Systems and Equipment discusses various systems and the equipment (components or assemblies) they comprise, and describes features and differences. This information helps system designers and operators in selecting and using equipment. An accompanying CD-ROM contains all the volume's chapters in both I-P and SI units.

System Requirements: MS Windows XP, Vista, or 7; Mac OS X v. 10.4.11 or higher; 256 MB of RAM; PDF viewing software; 125 MB hard disk space; web browswer

Published: 2012

ISBN: 9781936504251

Number of Pages: 922

ASHRAE PRINCIPLES OF HEATING, VENTILATING AND AIR-CONDITIONING, 6TH ED. 2010

Prazo de entrega entre 4 a 6 semanas.

PRINCIPLES OF HEATING, VENTILATING AND AIR-CONDITIONING, 6TH ED.

FULL DESCRIPTION

 

Principles of Heating, Ventilating, and Air Conditioning is a textbook based on the 2009 ASHRAE Handbook - Fundamentals. It contains the most current ASHRAE procedures and definitive, yet easy to understand, treatment of building HVAC systems, from basic principles through design and operation.

It is suitable both as a textbook and as a reference book for undergraduate engineering courses in the field of air conditioning, heating, and ventilation; for similar courses at technical and vocational schools; for continuing education and refresher short courses for engineers; and for adult education courses for professionals other than engineers, especially when combined with 2009 ASHRAE Handbook - Fundamentals.

The material is divided into three major sections: General Concepts, Chapters 1-10; Air-Conditioning Systems, Chapters 11-16; and HVAC&R Equipment, Chapters 17-19. There are several significant changes in this revised edition. Chapter 4 has a new format as well as new values for climatic design information. Chapter 5 has a new table for typical thermal properties (resistance and thermal conductivity) of common building and insulating materials. This includes new values of heating, wind, cooling, and dehumidifying design conditions. Chapter 6 has been extensively revised with new design data. In addition, the chapters on system design and equipment have been significantly revised to reflect recent changes and concepts in modern heating and air-conditioning system practices. A new chapter, 20 - Heat Exchange Equipment, gives more details on heat exchanger design.

A Solutions Manual is available to instructors. To purchase the Solutions Manual, please send your request on university letterhead to info@technospub.com.br

This book includes a CD containing the Radiant Time Series (RTS) Method Load Calculation Spreadsheets, which are intended as an educational tool both for the student and for the experienced engineer. These spreadsheets allow the user to perform RTS cooling load calculations for lights, people, equipment, walls/roofs, and fenestration components. Cooling and heating loads can be calculated for individual rooms or block load zones. 12-month cooling calculations can be done to determine the month and time of peak cooling load for each room or block load zone. In addition, room/zone worksheets can be copied and modified within the spreadsheet to analyze as many rooms or zones as desired. This CD has a single user license and requires Microsoft Excel®.

PRODUCT DETAILS

Edition:6th Published: 2010

ISBN:9781933742694

Number of Pages:576

ASHRAE HANDBOOK 4 - SINGLE VOLUMES CD SET W/ CD BINDER ( 2012 ASHRAE Handbook: HVAC Systems and Equipment , 2011 ASHRAE Handbook: HVAC Applications , 2010 ASHRAE Handbook: Refrigeration , 2009 ASHRAE Handbook: Fundamental )

Prazo de entrega entre 4 a 6 semanas.

ASHRAE HANDBOOK 4-SINGLE VOLUMES CD SET W/ CD BINDER 

FULL DESCRIPTION

The ASHRAE Handbook 4-Single Volumes CD Set includes both the I-P and SI versions of:

2012 ASHRAE Handbook: HVAC Systems and Equipment 

2011 ASHRAE Handbook: HVAC Applications

2010 ASHRAE Handbook: Refrigeration

2009 ASHRAE Handbook: Fundamentals

The CDs come in a unique binder. The binder is black with a white ASHRAE logo on the front cover and measures 7.5"w and 6.5"h with a capacity to hold up to 48 CDs or DVDs.

The 2012 ASHRAE Handbook: HVAC Systems and Equipment discusses various systems and the equipment (components or assemblies) that comprise them, and describes features and differences. This information helps system designers and operators in selecting and using equipment.
The 2011 ASHRAE Handbook: HVAC Applications covers a broad range of facilities and topics, and is written to help engineers design and use equipment and systems described in other Handbook volumes.

The 2010 ASHRAE Handbook: Refrigeration covers the refrigeration equipment and systems for applications other than human comfort. This book includes information on cooling, freezing, and storing food; industrial applications of refrigeration; and low-temperature refrigeration. Primarily a reference for the practicing engineer, this volume is also useful for anyone involved in cooling and storage of food products.

The 2009 ASHRAE Handbook: Fundamentals covers basic principles and data used in the HVAC&R industry. Its chapters cover psychrometrics, controls, sound and vibration, indoor environmental quality (IEQ), refrigerants, fuels, load and energy calculations, building envelopes and material properties, climatic design data, duct and piping systems design, and sustainability.

PRODUCT DETAILS:

Published: 2012

ASHRAE STANDARDS AND GUIDELINES CD-ROM 2013

ASHRAE STANDARDS AND GUIDELINES CD-ROM 2013

Prazo de entrega entre 4 a 6 semanas.

2013 ASHRAE Standards and Guidelines CD contains the complete library of ASHRAE standards, guidelines, and user's manuals as of December 1, 2012 - a total of 139 documents - that enables you to easily search, print, and copy and paste text or graphics as needed. All standards and guidelines are in PDF format, allowing for easy viewing using Adobe® Reader®.

System Requirements: Intel® Pentium® III Processor; Microsoft® Windows Vista® or MicrosoftWindows 7; 512 MB of RAM; CD-ROM drive; Adobe® Acrobat®/Adobe Reader® 8.0 or higher; Microsoft Internet Explorer; 800 MB hard-disk space

PRODUCT DETAILS:

Published: 2013

ISBN:9781936504374

Vanderbilt Latex Handbook, 3rd Edition (Hardcover Book)

Prazo de entrega entre 4 a 6 semanas.

Vanderbilt Latex Handbook, 3rd Edition (Hardcover Book)

R. Т. Vanderbilt Company, Inc.. in keeping with its long tradition of service, is pleased to present this third edition of the is pleased to present this third edition of the Vanderbilt Latex Handbook to the rubber industry. The handbook has been compiled as a source of information for persons primarily engaged in the latex branch of the industry.

It is intended to serve as a guide for the novice compounder so that laboratory and plant trials will generate meaningful data. For the experienced compounder, it is intended to serve as both a current and handy reference.

Vanderbilt Latex Handbook to the rubber industry. The handbook has been compiled as a source of information for persons primarily engaged in the latex branch of the industry.

Emphasis has intentionally been placed on the use of Vanderbilt compounding ingredients throughout the handbook. This was done in the belief that our product line of quality latex compounding materials is of sufficient depth that their use does not deviate from thje acceptable principals and practices of good latex compounding. The use of latex in commercial applications is a specialized art and is protected by many patents. It is strongly recommended that a careful search of the patent literature precede any attempt to put either a latex compound or process into commercial practice.

R. Т. Vanderbilt Company, Inc.. in keeping with its long tradition of service, is pleased to present this third edition of the Vanderbilt Latex Handbook to the rubber industry. The handbook has been compiled as a source of information for persons primarily engaged in the latex branch of the industry. It is intended to serve as aguide for the novice compounder so that laboratory and plant trials will generate meaningful data. Fortheexperienced compounder, it is intended to serve as both a current and handy reference. Emphasis has intentionally been placed on the use of Vanderbilt compounding ingredients throughout the handbook.

This was done in the belief that our product line of quality latex compounding materials is of sufficient depth that their use does not deviate from thje acceptable principals and practices of good latex compounding. The use of latex in commercial applications is a specialized art and is protected by many patents. It is strongly recommended that a careful search of the patent literature precede any attempt to put either a latex compound or process into commercial practice.

Vanderbilt Rubber Handbook, 14th Edition. R.T. Vanderbilt, Norwalk, CT (2010). Hardcover Book

Prazo de entrega entre 4 a 6 semanas.

Vanderbilt Rubber Handbook, 14th Edition. R.T. Vanderbilt, Norwalk, CT (2010). Hardcover Book

This manufacturer and distributor of industrial chemicals, polymers and minerals for the rubber and plastics industries introduces the first color edition of its handbook, which was initially published in 1920. Featuring color photographs and easy-to-read color charts and graphs, the handbook contains 46 chapters by expert authors. New chapters are also included on polymers. Book or CD formats are offered.

This new edition contains 46 chapters by expert authors well-known in the rubber industry, R.T. Vanderbilt said.

In addition to updated and revised chapters, this edition has new chapters on polymers, which were not discussed in previous editions.

SNCT CODAP 2013 (Div 3) - Recommandations pour la Maintenance des Appareils à Pression [Version française / IMPRIMEE]

Prazo de entrega entre 4 a 6 semanas.


SNCT CODAP 2013 (Div 3) - Recommandations pour la Maintenance des Appareils à Pression [Version française / IMPRIMEE]


Quels types d’appareils ? Partie G (Généralités) : spécifiant les domaines d’application et les exigences réglementaires applicables à l’appareil Partie M (Matériaux) : proposant des méthodes d’identification des matériaux d’origine et de ceux utilisables dans le cadre d’une réparation Quelles méthodes d’évaluation ? Partie SI (Inspection & Aptitude au servce) : décrivant les modes d’endommagement et proposant des recommandations générales relatives à l’inspection et les procédures d’évaluation permettant de détermine l’acceptabilité des endommagements constatés (mesures et contrôles nécessaires, analyse numérique des résultats…) Quelles solutions de réparations ? Partie RE (Réparation des appareils) : proposant des recommandations pour le choix des matériaux, la conception et le dimensionnement, les opérations de fabrication et les contrôles après fabrication Partie REX (Retour d’expérience) : proposant des fiches d’accidents détaillées réalisées par le Bureau d’Analyse des Risques et Pollutions Industrielles (BARPI) du Ministère chargé de l’environnement BDMat incluse 12 000 nuances de matériaux dont les caractéristiques mécaniques ont été répertoriées par le Cetim et le SNCT

SNCT CODAP Divisions 1 & 2 Edition 2010 Revision 10/12 - Code de Construction des Appareils à Pression non soumis à l'action de la flamme [Version française / IMPRIMEE]

 Prazo de entrega entre 4 a 6 semanas.

Revision 10/12 - Code de Construction des Appareils à Pression non soumis à l'action de la flamme [Version française / IMPRIMEE]

SNCT CODAP Divisions 1 & 2 Edition 2010 Revision 10/12 - Code de Construction des Appareils à Pression non soumis à l'action de la flamme [version française] / Version Imprimee 

La présente révision, résumée ci-après, d’une part répond aux questions récentes des utilisateurs et d’autre part prend en compte les évolutions techniques. 
Avec cette nouvelle évolution, le SNCT continue d’assurer la pérennité du document exploité aujourd’hui depuis plus d’un demisiècle, reflet du savoir faire des utilisateurs du Code (Fabricants, Donneurs d’ordre, Organismes de contrôle …)

SECTION GÉNÉRALITÉS 

− Nouveaux Chapitres sur les appareils fabriqués en série (GA4.10 et GA5.10). SECTION MATÉRIAUX − Mise à jour et révisions des Sections M2 à M3. 

SECTION CONCEPTION ET CALCUL 

 
− Prise en compte des nouvelles exigences réglementaires relatives aux installations soumises au séisme (C1.A2). − Règles alternatives pour le dimensionnement des échangeurs à deux plaques fixes (C7.5) et à une plaque fixe et une plaque mobile (C7.6). − Ajout des courbes de fatigue pour les soufflets de dilatation en alliages de nickel Incoloy 800H et Inconel 625. − Nouvelle Section C12 sur le dimensionnement des doubles enveloppes cylindriques avec enveloppes extérieures constituées de tunnels réchauffeurs-refroidisseurs. 

SECTION FABRICATION 

− Nouvelle Annexe FA3 regroupant les exigences relatives au soudage. − Mise à jour de l’ensemble des fiches et nouvelles fiches AQUAP-SNCT. − Révisions et compléments des recommandations et des exigences pour le soudage des aciers inoxydables austéno-ferritiques de l’aluminium et de ses alliages ainsique du cuivre et de ses alliages. − Ajout de nouvelles recommandations en Annexe FA2 concernant les matériauxd’apport, le soudage des aciers à laminage thermo-mécanique et le soudage des aciers trempés-revenus. 
SECTION CONTRÔLES - ESSAIS - INSPECTION 
− Ajout d’exigences relatives aux contrôles non destructifs des accessoires soudés sur le corps de l’appareil (CEA1). − Révision des annexes Contrôles relatives à la radiographie (CEA5) et à laradiographie numérisée (CEA6). 

Préface à l’Edition 2010 du CODAP®

L’évolution des marchés des Fabricants, les modifications régulières des normes internationales, européennes et françaises et les nombreuses évolutions techniques récentes ont conduit les instances dirigeantes du SNCT à lancer de nouvelles éditions des codes de construction pour un nouveau cycle de cinq ans.

Héritier d’une expérience et d’un savoir faire de plus de 70 ans, le CODAP, pour lequel l’intérêt très soutenu des Industriels ne se dément pas, poursuit son évolution afin de faciliter son utilisation dans le contexte réglementaire propre à chaque utilisateur.

Composée de trois Divisions, cette nouvelle édition à vocation internationale répond, comme l’édition 2005, aux exigences les plus récentes de la norme ISO 16528.

La Division 1 est essentiellement destinée à la réalisation des appareils les plus courants à fabriquer avec les matériaux les plus fréquemment utilisés.

La Division 2 destinée à la construction d’appareils plus complexes offre l’ensemble des possibilités des versions antérieures du Code, largement complété par de nombreuses innovations.

La Division 3, entièrement nouvelle, propose des recommandations concernant le suivi en service et la maintenance des équipements construits conformément aux différentes éditions du CODAP ou à d’autres Codes et Normes.

Reflet du consensus entre Constructeurs, Donneurs d’ordre et Clients, Organismes d’inspections, Centres techniques … cette nouvelle édition a pour objectif de permettre de construire des appareils répondant aux exigences réglementaires et d’en assurer le suivi en service et la maintenance dans les meilleures conditions économiques possibles.

Cette nouvelle édition du CODAP®, dont la présentation continue d’être améliorée afin d’en faciliter l’utilisation, devrait permettre aux Fabricants et Constructeurs de relever les défis industriels des années à venir.

IFI Inch Fastener Standards Book, 8th Edition - 2011 - Hard Cover

Produto disponível sob importação.  Prazo de entrega entre 4 a 6 semanas.


IFI Inch Fastener Standards Book, 8th Edition - 2011 - Hard Cover

The 8th Edition has over 80 of the most commonly used inch fastener standards. Over 50% of the content has been updated since the 7th Edition. This 1147 page book is the latest of the IFI Standards Book referred to by industry as the "Bible of the Fastener Industry" since the 1950s.

This is a "must have" for all companies that buy, sell, or install mechanical fasteners made to the inch standards.

EJMA Standards 9th Edition / 2008 / with 2011 Addenda (Each includes one copy of Practical Guide)

Produto disponível sob importação.  Prazo de entrega entre 4 a 6 semanas.


EJMA Standards 9th Edition / 2008 / with 2011 Addenda (Each includes one copy of Practical Guide)

EJMA Standards: The Authority on Expansion Joints The EJMA Standards are recognized throughout the
world as the authority on the proper selection and application of metallic bellows type expansion joints for safe and reliable piping and vessel installation. The Ninth Edition standards combine the knowledge and experience of the leading manufacturers of expansion joints into an invaluable reference document.

Receive a Free Copy of A Practical Guide To Expansion JointsWith each copy of the Ninth Edition, you will receive EJMA’s Practical Guide to Expansion Joints, a pocket size primer based on EJMA Standards. The Guide is intended to provide users with a basic understanding of expansion joints. It will also assist the user in communicating design requirements to the manufacturers and to properly install and maintain the expansion joint in service.(NOTE: This Guide is not intended as a source for expansion joint design or application details.)

Edition:9th
Published: 01/01/2008

TAPPI Standards, Technical Information Papers, and Useful Methods CD 2013-2014

Prazo de entrega entre 4 a 6 semanas.

TAPPI Standards, Technical Information Papers, and Useful Methods CD 2013-2014

This CD contains all current TAPPI Standards (Official Test Methods, Provisional Test Methods, Classical Methods, Standard Practices, Guidelines, Specifications, and Glossaries), Technical Information Papers (TIPs), and Useful Methods (UMs).

The Standards include approximately 240 documents that have been developed and reviewed by TAPPI Standard-Specific Interest Groups. For easy reference, included is a search engine, reference materials list, test equipment suppliers, a supplier directory, safety sources, test laboratories and research facilities.
It also includes hundreds of Technical Information Papers (TIPs) on papermaking, pulping, engineering, and corrugated containers topics. This specialized information includes technical data, calculations, resource information, recommended practices, glossaries, guidelines, and bibliographies for use in the manufacture of paper and related products. This revised collection is essential for every mill, converting plant, research institution, and technical center in the pulp, paper, and corrugated containers industry.

As an added benefit, the CD now contains Useful Methods (UMs). These methods describe tests, procedures, or practices written in the same general style as a TAPPI Standard Test Method, but with minimum precision requirement. UMs do not receive the same review through a consensus process, and thus are not Standards, but are used often in the industry as quick plant floor methods.

The CD-ROM includes numerical and subject indexes.

Standards, TIPs and UMs CD-ROM is an individually licensed product and access is restricted to one user. It is a copyright violation to share information beyond the primary user.

Product code: STUCD-13

Technos Publicações : Atualize, Audite e Monitore sua Coleção de Normas

Atualize, Audite e Monitore sua Coleção de Normas

Normas técnicas são documentos dinâmicos que frequentemente sofrem alterações sem aviso prévio e isso pode afetar a segurança, o desempenho e o design de produtos e\ou serviços, deixando as empresas vulneráveis as responsabilidades e as conseqüências de usar documentação obsoleta ou versões diferentes de um mesmo documento.  Por outro lado, normas atualizadas asseguram mais competitividade, mais compatibilidade, delimita e assegura a conformidade de seus produtos\serviços.

Todas as alterações nas normas em seu acervo de normas precisam ser continuamente avaliadas, analisando o impacto que causam nos processos internos da empresa.

Possuimos algumas soluções para atender estas necessidades:

Sistema de Controle e Auditoria Normativa – SCAN 

Para muitas empresas, manter uma coleção de normas em  conformidade é um problema. O Sistema de Controle e Auditoria Normativa – SCAN foi desenvolvido pela Technos Publicações para atender empresas que necessitam controlar, acompanhar essas mudanças de forma rápida, precisa e com grande confiabilidade a coleção de documentos de sua biblioteca que precisa ser mantida atualizada. O processo de auditoria consiste em minuciosa análise em cada norma de sua lista. Se a norma não estiver correta ou completa,  vamos identificá-la para você. Assim, estas poderão ser substituídas e sua coleção poderá passar por qualquer auditoria de Qualidade, Regulatória ou de Certificação que possuir. Fornecemos um relatório em papel, pdf  ou em formato de planilha excel, contendo o corrente status de sua norma /vigência (última edição) e regulamentos técnicos, incluindo títulos, validade,documentos cancelados, documentos, substituídos,  erratas, emendas, suplementos, sumários, etc.

Temos clientes que tem contado com este sistema há anos, e que  o incluem o SCAN em seus Sistemas de Qualidade  para suas necessidades de controle de documentação!

O preço dessa assinatura depende da quantidade de documentos que precisa controlar, da regularidade e dos serviços que deseja incluir no monitoramento. Nos 3 primeiros meses da assinatura do sistema os valores pagos serão totalmente revertidos como crédito para as compras das normas defasadas. Descreva sua necessidade e solicite um orçamento!

Sistema de Alerta Normativo - SAN

SAN é o nosso serviço alerta sobre assuntos normativos que permite sua empresa acompanhar não sua coleção, mas  todas as mudanças e desenvolvimentos normativos críticos para o seu negócio. O SAN fornece trimestralmente um relatório contendo informações sobre novas normas associadas a sua área de interesse. As áreas são baseadas na classificação ICS (International Code Standards). O preço desde serviço e de R$ 300 por ano/ assunto. Se você escolher mais de um assunto o preço se reduz a R$ 200 por ano/assunto.

Sistema de Controle e Auditoria de Regulamentos Técnicos - SCARE

Os regulamentos das Agências Governamentais Brasileiras diferentemente da maioria das normas técnicas são obrigatórios e sua não observância e cumprimento pode gerar várias penalidades.

Auxiliamos as empresa a acessar conteúdos e se manter atualizadas sobre os regulamentos das Agências Governamentais necessários a adequação dos seus processos produtivos e/ou serviços.

Sistema Regular de Notificação

Quando que você compra  um documento conosco poderemos adicioná-lo gratuitamente (por 1 ano da data do pedido) à nossa lista de notificação e mensalmente sempre que houver qualquer  mudança lhe enviaremos uma notificação por e-mail. Se você já possui agumas normas e gostaria de adicionar a este serviço, o custo anual é de R$ 10 por documento. 

 Para maiores informações:

Technos Publicações

www.technospub.com.br

Email: info@technospub.com.br

Facebook: Technospub

Twitter: @technospub

Ullmann's Encyclopedia of Industrial Chemistry, 7th Edition, 40 Volumes / ISBN: 978-3-527-32943-4 / 2011

Ullmann's Encyclopedia of Industrial Chemistry, 7th Edition, 40 Volumes / ISBN: 978-3-527-32943-4 / 2011

Produto disponível sob importação.  Prazo de entrega entre 4 a 6 semanas.

The 7th print edition of the Ullmann's Encyclopedia offers 1050 articles in A - Z order, contained in 39 hardbound volumes, plus an index volume.

It covers the following main topics:

Agrochemicals (19 Articles)

Analytical Techniques (52 Articles)

Biochemistry & Biotechnology (33 Articles)

Chemical Reactions (18 Articles)

Dyes and Pigments (46 Articles)

Energy (26 Articles)

Environmental Protection, Industrial Safety (34 Articles)

Fat, Oil, Food and Feed, Cosmetics (61 Articles)

Inorganic Chemicals (108 Articles)

Materials (55 Articles)

Metals and Alloys (69 Articles)

Organic Chemicals (172 Articles)

Pharmaceuticals (67 Articles)

Polymers and Plastics (72 Articles)

Processes & Process Engineering (122 Articles)

Renewable Resources (21 Articles)

Special Topics (83 Articles)

ULLMANN'S is built from generations of expertise. Since the first edition was published almost 100 years ago, ULLMANN'S has established itself internationally as the household name for industrial chemists and chemical engineers.

Held in the highest regard as a source of reliable, authoritative, and valuable information. Generations of chemists across the world trust the insight and inexhaustible knowledge of ULLMANN'S, in both daily reference and for continuing professional development. Now publishing in its 7th Edition. 3,000 authors from over 30 countries have contributed. 600 of the 1,050 articles have been thoroughly updated, 40 provide completely new content. Several hundred full color figures are placed throughout. With a new and modern layout, ULLMANN'S presents a wealth of information in a clear, accessible and beautifully presented format.

Key features of the 7th edition:

* 1,050 articles (200 more than in the 6th edition), 30,000 pages, 22,000 figures, 8,000 tables, 19,000 cross-references and 85,000 index entries leave no question unanswered

* New 'Further Reading' section and hundreds of new colour figures

* New topics: Ionic Liquids, Biodegradable Polymers, Microreactors, Biorefineries, Good Manufacturing Practice, and many more

ULLMANN's has been recognised as Outstanding Academic Title 2012 (Choice, v.50, no. 05, January 2013).

ASM Handbook Complete Set DVD / 2013 Edition / ISBN: 978-1-62708-004-0

ASM Handbook Complete Set DVD / 2013 Edition / ISBN: 978-1-62708-004-0

Produto disponível sob importação.  Prazo de entrega entre 4 a 6 semanas.

The ASM Handbook series contains peer-reviewed, trusted information in every area of materials specialization. The current complete set – 28 volumes, 2,457 in-depth handbook articles, 27,684 pages – is available on one disc! The Complete Set DVD includes every article, table, chart, and photograph in the current series published through the end of 2012. Search across the entire series or browse the table of contents for each volume. The content is presented in PDF format, with all of the standard Adobe Reader functions for navigation and finding content within articles.

The DVD can be used with any Windows platform laptop or desktop PC with a DVD drive. Articles can be printed, and text, table, and images can be copied and pasted. Note: the files on the disc cannot be copied, so the DVD must be present in the local machine for the content to be accessed.

Note: Disc files cannot be copied. DVD must be present in the local machine for content access. Purchasers of previous ASM Handbook CD or DVD Complete Sets can receive a special upgrade discount. Contact the ASM Member Service Center for details. Does not include Volume 5A.

Volumes Included:

Volume 1 Properties and Selection: Irons, Steels, and High-Performance Alloys (1990)

Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials (1990)

Volume 3 Alloy Phase Diagrams (1992)

Volume 4 Heat Treating (1991)

Volume 5 Surface Engineering (1994)

Volume 6 Welding, Brazing, and Soldering (1993)

Volume 6A Welding Fundamentals and Processes (2011)

Volume 7 Powder Metal Technologies and Applications (1998)

Volume 8 Mechanical Testing and Evaluation (2000)

Volume 9 Metallography and Microstructures (2004)

Volume 10 Materials Characterization (1986)

Volume 11 Failure Analysis and Prevention (2002)

Volume 12 Fractography (1987)

Volume 13A Corrosion: Fundamentals, Testing, and Protection (2003)

Volume 13B Corrosion: Materials (2005)

Volume 13C Corrosion: Environments and Industries (2006)

Volume 14A Metalworking: Bulk Forming (2005)

Volume 14B Metalworking: Sheet Forming (2006)

Volume 15 Casting (2008)

Volume 16 Machining (1989)

Volume 17 Nondestructive Evaluation and Quality Control (1989)

Volume 18 Friction, Lubrication, and Wear Technology (1992)

Volume 19 Fatigue and Fracture (1996) Volume 20 Materials Selection and Design (1997)

Volume 21 Composites (2001)

Volume 22A Fundamentals of Modeling for Metals Processing (2009)

Volume 22B Metals Process Simulation (2010)

Volume 23 Materials for Medical Devices (2012) [New]

ISBN-10: 162708004X  

ISBN-13:  978-1-62708-004-0

Edition: 2013

ACGIH Industrial Ventilation: A Manual of Recommended Practice for Design, 28th Edition / 2013 / ISBN: 978-1-607260-57-8 /648 pages

ACGIH Industrial Ventilation: A Manual of Recommended Practice for Design, 28th Edition / 2013 / ISBN: 978-1-607260-57-8 /648 pages

Produto disponível sob importação. Prazo de entrega entre 4 a 6 semanas.

NEW! Now with both Imperial and Metric Values! Since its first edition in 1951, IndustrialVentilation: A Manual of Recommended Practice has been used by engineers and industrial hygienists to design and evaluate industrial ventilation systems. The 28th edition of thisManual continues this tradition. Renamed Industrial Ventilation: A Manual of Recommended Practice for Design (the Design Manual), this new edition now includes metric values.

RDA: Resource Description and Access Print / ISBN-13: 978-0-8389-1093-1 / Year Published: 2011 / Print Version / Loose Leaf / (note: binder not included)

Produto disponível sob importação.  Prazo de entrega entre 4 a 6 semanas.

RDA: Resource Description and Access Print / ISBN-13: 978-0-8389-1093-1 / Year Published: 2011 / Print Version / Loose Leaf / (note: binder not included)

1096 pages

8.5" x 11"Drilled looseleaf format with tabs (note: binder not included)

ISBN-13: 978-0-8389-1093-1 Year Published: 2011

RDA’s content has been developed in a collaborative process led by the international Joint Steering Committee (JSC).

Designed for the digital world and an expanding universe of metadata users, RDA: Resource Description and Access is the new, unified cataloging standard. Benefits of RDA includeA structure based on the conceptual models of FRBR (functional requirements for bibliographic data) and FRAD (functional requirements for authority data) to help catalog users find the information they need more easilyA flexible framework for content description of digital resources that also serves the needs of libraries organizing traditional resourcesA better fit with emerging technologies, enabling institutions to introduce efficiencies in data capture and storage retrieval.

This full-text print version of RDA offers a snapshot that serves as an offline access point to help solo and part-time catalogers evaluate RDA, as well as to support training and classroom use in any size institution. An index is included. The online RDA Toolkit includes PDFs, but purchasing the print version offers a convenient, time-saving option. 

MARC 21 (Machine Readable Catalog) / STD ANSI/NISO Z39.2-1994 (R2009) Information Interchange Format (ISBN: 978-1-880124-08-6) / Formato Digital PDF

 Standard:ANSI/NISO Z39.2

Year:1994 (R2009)

Title of Standard:Information Interchange Format

ANSI Approval Date:Wednesday, 03 February 2010

Abstract:The basis for the MARC (Machine Readable Catalog) record, this standard specifies the requirements for a generalized interchange format that can be used for the communication of records in any media.

Information Interchange Format (revision and redesignation of ANSI Z39.2-1985)This standard specifies the requirements for a generalized interchange format that will accommodate many types of data, especially data describing all forms of material susceptible of bibliographic description. If describes a feneralized structure specifically for exchange of data between processing systems and not necessarily for use as a processing format within systems. This format may be used for the interchange of records in any media.

ISBN:978-1-880124-08-6

Pagination:12

MARC é um acrônimo para "Machine Readable Cataloging", registro catalográfico legível por máquina. O formato MARC define uma estrutura para registros bibliográficos que permite o seu armazenamento em meio magnético e tratamento adequado pelos sistemas de computador, contendo recursos que permitem ao computador identificar e interpretar a informação contida em um registro catalográfico.

Um registro MARC é composto por três elementos: estrutura, indicação do conteúdo e conteúdo propriamente dito. A estrutura do registro é uma implementação dos padrões internacionais ANSI Z39.2 e ISO 2709. As indicações de conteúdo são códigos e convenções estabelecidos para identificar e caracterizar os dados dentro do registro e permitir sua manipulação.Os conteúdos dos dados que compõe um registro MARC geralmente são definidos por padrões externos ao formato, como: International Standard Bibliographic Description (ISBD), Anglo-American Cataloguing Rules (AACR2), Library of Congress Subject Headings (LCSH) ou outros códigos usados pela instituição criadora do registro.