| ID | Title |
| C-1 | Methods for Pressure Testing Compressed Gas Cylinders |
| C-3 | Standards for Welding on Thin-Walled, Steel Cylinders
Reaffirmed 2011 |
| C-5 | Wall Stress Requalification Criteria for High Pressure Seamless Steel Cylinders |
| C-6 | Standards for Visual Inspection of Steel Compressed Gas Cylinders |
| C-6.1 | Standards for Visual Inspection of High Pressure Aluminum Compressed Gas Cylinders |
| C-6.2 | Guidelines for Visual Inspection and Requalification of Fiber Reinforced High Pressure Cylinders |
| C-6.3 | Guidelines for Visual Inspection and Requalification of Low Pressure Aluminum Compressed Gas Cylinders
Reaffirmed 2005 |
| C-6.4 | Methods for External Visual Inspection of Natural Gas Vehicle (NGV) and Hydrogen Vehicle (HV) Fuel Containers and Their Installations |
| C-6.1F | Normes Concernant L'inspection Visuelle des Bouteilles à Gaz Haute Pression en Aluminum (C-6.1 French) |
| C-6.3F | Recommandations concernant l’inspection visuelle et la requalification des bouteilles à gaz basse pression en aluminium (C-6.3 French)
1999 Edition/Reaffirmed 2005 |
| C-7 | Guide to the Preparation of Precautionary Labeling and Marking of Compressed Gas Containers |
| C-8 | Standard for Requalification of DOT-3HT, CTC-3HT, and TC-3HTM Seamless Steel Cylinders
Reaffirmed 2010 |
| C-9 | Standard Color Marking of Compressed Gas Containers for Medical Use
Reaffirmed 2008 |
| C-10 | Recommended Procedures for Changes of Gas Service for Compressed Gas Cylinders |
| C-11 | Recommended Practices for Inspection of Compressed Gas Cylinders at Time of Manufacture |
| C-12 | Qualification Procedure for Acetylene Cylinder Design |
| C-13 | Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders |
| C-14 | Procedures for Fire Testing of DOT Cylinder Pressure Relief Device Systems
Reaffirmed 2010 |
| C-15 | Procedures for Cylinder Design Proof and Service Performance Tests |
| C-16 | CGA Registration Program for Cylinder Owner Symbols |
| C-16.1 | CGA Cylinder Owner's Registration Symbols and Company Names |
| C-17 | Methods to Avoid and Detect Internal Gas Cylinder Corrosion
Harmonized with EIGA Doc 62/05 |
| C-18 | Methods for Acoustic Emission Requalification of Seamless Steel Compressed Gas Tubes |
| C-19 | FRP-3—Guideline for Filament-Wound Composite Cylinders with Nonloadsharing Liners |
| C-20 | Methods for Ultrasonic Examination of Metallic, DOT and TC 3-Series Gas Cylinders and Tubes |
| C-21 | Design, Qualification, and Testing of Pressure Vessels for Portable, Reversible Metal Hydride Systems |
| C-5F | Contraintes de rejet lors de la requalification des bouteilles à gaz a haute pression en acier sans soudure (C-5 French) |
| C-8F | Norme sur la Requalification des Bouteilles en Acier sans Soudure DOT-3HT, CTC-3HT et TC-3HTM, 2005 edition (C-8 French) |
| E-1 | Standard for Rubber Welding Hose and Hose Connections for Gas Welding, Cutting, and Allied Processes |
| E-2 | Hose Line Check Valve Standards for Welding and Cutting
Reaffirmed 2004, 1997 |
| E-3 | Low Pressure Pipeline Station Outlet/Regulator Inlet Connection Standard |
| E-4 | Standard for Gas Pressure Regulators |
| E-5 | Torch Standard |
| E-6 | Standard for Hydraulic Type Pipeline Protective Devices as Required by NFPA 51 |
| E-7 | Medical Gas Pressure Regulators, Flowmeters, and Orifice Flow Selectors |
| E-8 | Gas Flowmeters |
| E-9 | Standard for Flexible, PTFE-Lined Pigtails for Compressed Gas Service |
| E-10 | Maintenance of Medical Gas and Vacuum Systems in Health Care Facilities |
| E-11 | Stationary Compressed Gas Cylinder Discharging Manifolds for Working Pressures up to 3000 psig |
| E-14 | Maximum Leakage Rates (Gas Tightness) of Equipment Used for Welding, Cutting, and Allied Processes
Reaffirmed 2007 |
| E-15 | Periodic Service Program for Industrial Gas Regulators |
| E-16 | Compressed Gas Check Valves up to 3000 psig |
| E-17 | Hose Line Quick-Connect Couplings for Welding, Cutting, and Allied Processes |
| E-18 | Medical Gas Valve Integrated Pressure Regulators |
| G-1 | Acetylene |
| G-1.1 | Commodity Specification for Acetylene |
| G-1.2 | Acetylene Metering and Piping |
| G-1.5 | Carbide Lime: Its Value and Uses
Reaffirmed 2008 |
| G-1.6 | Recommended Practices for Mobile Acetylene Trailer Systems |
| G-1.7 | Standard for Storage and Handling of Calcium Carbide in Containers |
| G-1.8 | Guidelines for the Operation and Closure of Carbide Lime Ponds |
| G-1.9 | Recommended Practices for Maintaining the Proper Solvent Level in Acetylene Cylinders |
| G-2 | Anhydrous Ammonia |
| G-2.1 | American National Standard Safety Requirements for the Storage and Handling of Anhydrous Ammonia (ANSI K61.1) |
| G-2.2 | Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia
Reaffirmed 1997 |
| G-3 | Sulfur Dioxide |
| G-4 | Oxygen |
| G-4.1 | Cleaning Equipment for Oxygen Service |
| G-4.3 | Commodity Specification for Oxygen |
| G-4.4 | Oxygen Pipeline Systems
Harmonized with EIGA Doc 13/02. |
| G-4.6 | Oxygen Compressor Installation and Operation Guide |
| G-4.7 | Installation Guide for Stationary, Electric-Motor-Driven, Centrifugal Liquid Oxygen Pumps |
| G-4.8 | Safe Use of Aluminum-Structured Packing for Oxygen Distillation
Harmonized with EIGA Doc 701/04 |
| G-4.9 | Safe Use of Brazed Aluminum Heat Exchangers for Producing Pressurized Oxygen
Harmonized with EIGA Doc 145/08 (Formerly EIGA Doc 702/04) |
| G-4.10 | Design Considerations to Mitigate the Potential Risks of Toxicity When Using Nonmetallic Materials in High Pressure Oxygen Breathing Gas Systems
Harmonized with EIGA Doc 73/08 |
| G-4.11 | Reciprocating Compressors for Oxygen Service
Harmonized with EIGA Doc 10/09 |
| G-5 | Hydrogen |
| G-5.3 | Commodity Specification for Hydrogen |
| G-5.4 | Standard for Hydrogen Piping Systems at User Locations |
| G-5.5 | Hydrogen Vent Systems
Reaffirmed 2007 |
| G-5.6 | Hydrogen Pipeline Systems
Harmonized with EIGA Doc 121/04 |
| G-5.7 | Carbon Monoxide and Syngas Pipeline Systems
Harmonized with EIGA Doc 120/04 |
| G-5.8 | High Pressure Hydrogen Piping Systems at Consumer Locations (Superseded by G-5.4)
Superseded by G-5.4 |
| G-6 | Carbon Dioxide |
| G-6.1 | Standard for Insulated Liquid Carbon Dioxide Systems at Consumer Sites |
| G-6.2 | Commodity Specification for Carbon Dioxide |
| G-6.3 | Carbon Dioxide Cylinder Filling and Handling Procedures |
| G-6.4 | Safe Transfer of Liquefied Carbon Dioxide in Insulated Cargo Tanks, Tank Cars, and Portable Containers |
| G-6.5 | Standard for Small, Stationary, Insulated Carbon Dioxide Supply Systems |
| G-6.6 | Standard for Elastomer-Type Carbon Dioxide Bulk Transfer Hose |
| G-6.7 | Safe Handling of Liquid Carbon Dioxide Containers That Have Lost Pressure |
| G-6.8 | Transfilling and Safe Handling of Small Carbon Dioxide Cylinders |
| G-6.9 | Dry Ice |
| G-6.10 | Flammable Gases and/or Oxygen Contamination in Carbon Dioxide Feed Gas |
| G-6.11 | Concentration of Impurities in Bulk Carbon Dioxide Storage Tanks at Customer Sites |
| G-7 | Compressed Air for Human Respiration |
| G-7.1 | Commodity Specification for Air |
| G-8.1 | Standard for Nitrous Oxide Systems at Customer Sites |
| G-8.2 | Commodity Specification for Nitrous Oxide |
| G-9.1 | Commodity Specification for Helium |
| G-10.1 | Commodity Specification for Nitrogen |
| G-11.1 | Commodity Specification for Argon
Reaffirmed 2008 |
| G-12 | Hydrogen Sulfide |
| G-13 | Storage and Handling of Silane and Silane Mixtures (an American National Standard)
Approved as an American National Standard on 8/16/06. Formerly P-32, First Edition. |
| G-14 | Nitrogen Trifluoride
Harmonized with EIGA Doc 92/10 |
| G-15 | Fluorine and Fluorine Mixtures with Inert Gases
Harmonized with EIGA Doc 140/10 |
| G-16 | Arsine
Harmonized with AIGA 050/08,
JIMGA T-S/36/08 |
| H-1 | Service Conditions for Portable, Reversible Metal Hydride Systems |
| H-2 | Guidelines for the Classification and Labeling of Hydrogen Storage Systems with Hydrogen Absorbed in Reversible Metal Hydrides
Reaffirmed 2010 |
| H-3 | Cryogenic Hydrogen Storage |
| H-4 | Terminology Associated with Hydrogen Fuel Technologies |
| H-5 | Installation Standards for Bulk Hydrogen Supply Systems |
| M-1 | Guide for Medical Gas Supply Systems at Consumer Sites |
| M-2 | General Guide for the Manufacturer of Medical Gases Classified as Drugs |
| M-3 | Guide for the Manufacturer of Bulk Medical Gases |
| M-5 | Guide for Home Respiratory Care Firms Filling or Distributing Liquid Oxygen USP |
| M-6 | Guideline for Analytical Method Validation |
| M-7 | Guideline for Qualifying Suppliers Used by Medical Gas Manufacturers and Distributors |
| M-8 | Guideline for the Manufacturer of Calibration Gas Standards Used to Analyze Medical Gases |
| M-9 | Maintaining Bulk Gas Supplier Fingerprint Analysis at Compressed Medical Gas Filling Facilities |
| M-10 | Guide to Food Gas Regulations and Industry Practices |
| M-11 | Compliance with the Quality Systems Approach to Pharmaceutical CGMPs Guidance |
| M-12 | Investigating Out-of-Specification Test Results for Medical Gas Manufacturing |
| M-13 | Certifying Third-Party Testing Laboratories |
| M-14 | Bulk Liquid Oxygen and Bulk Liquid Nitrogen Trailer Change of Grade |
| P-1 | Safe Handling of Compressed Gases in Containers |
| P-2 | Characteristics and Safe Handling of Medical Gases |
| P-2.5 | Transfilling of High Pressure Gaseous Oxygen Used for Respiration |
| P-2.6 | Transfilling of Liquid Oxygen Used for Respiration |
| P-2.7 | Guide for the Safe Storage, Handling, and Use of Small Portable Liquid Oxygen Systems in Health Care Facilities |
| P-5 | Suggestions for the Care of High Pressure Air Cylinders for Underwater Breathing |
| P-6 | Standard Density Data, Atmospheric Gases and Hydrogen |
| P-7 | Standard for Requalification of Cargo Tank Hose Used in the Transfer of Carbon Dioxide Refrigerated Liquid |
| P-8 | Safe Practices Guide for Cryogenic Air Separation Plants |
| P-8.1 | Safe Installation and Operation of PSA and Membrane Oxygen and Nitrogen Generators |
| P-8.2 | Guideline for Validation of Air Separation Unit and Cargo Tank Filling for Oxygen USP and Nitrogen NF |
| P-8.3 | Perlite Management |
| P-8.4 | Safe Operation of Reboilers/Condensers in Air Separation Units
Harmonized with EIGA Doc 65/99 |
| P-8.5 | The Impact of Ambient Air Contaminants on Validation Requirements for the Air Separation Process
Reaffirmed 2009 |
| P-8.6 | Unmanned Air Gas Plants—Design and Operation
Harmonized with EIGA Doc 132/05 |
| P-9 | The Inert Gases: Argon, Nitrogen, and Helium |
| P-11 | Metric Practice Guide for the Compressed Gas Industry |
| P-12 | Safe Handling of Cryogenic Liquids |
| P-15 | Filling of Industrial and Medical Nonflammable Compressed Gas Cylinders |
| P-16 | Recommended Procedures for Nitrogen Purging of Tank Cars |
| P-17 | Procedures for Pneumatic Retesting of Cargo and Portable Tanks |
| P-18 | Standard for Bulk Inert Gas Systems (an American National Standard)
Approved as an American National Standard on 12/5/06. |
| P-19 | CGA Recommended Hazard Ratings for Compressed Gases |
| P-20 | Standard for Classification of Toxic Gas Mixtures |
| P-21 | Guidelines for the Development of Pre-trip Inspection Checklist and Reports for MC-338, TC-338, TC-341, and CGA-341 Cargo Tanks |
| P-22 | The Responsible Management and Disposition of Compressed Gases and their Cylinders |
| P-23 | Standard for Categorizing Gas Mixtures Containing Flammable and Nonflammable Components |
| P-24 | Guide to the Preparation of Material Safety Data Sheets |
| P-25 | Guide for Flat-Bottomed LOX/LIN/LAR Storage Tank Systems |
| P-26 | Guidelines for Inspection and Repair of MC-330 and MC-331 Anhydrous Ammonia Cargo Tanks (formerly TB-2)
Reaffirmed 2009 |
| P-27 | Recommended Hose Management Practice for Uninsulated Stainless Steel Cryogenic Cargo Tank Hose |
| P-28 | Risk Management Plan Guidance Document for Bulk Liquid Hydrogen Systems |
| P-29 | Application of OSHA PSM and EPA RMP to the Compressed Gas Industry |
| P-30 | Portable Cryogenic Liquid Containers--Use, Care, and Disposal |
| P-31 | Liquid Oxygen, Nitrogen, and Argon Cryogenic Tanker Loading System Guide |
| P-34 | Safe Handling of Ozone-Containing Mixtures Including the Installation and Operation of Ozone-Generating Equipment
Reaffirmed 2007 |
| P-35 | Guidelines for Unloading Tankers of Cryogenic Oxygen, Nitrogen, and Argon
Reaffirmed 2006 |
| P-36 | The Safe Preparation of Gas Mixtures
Reaffirmed 2007
Harmonized with EIGA Doc 39/01 |
| P-37 | Good Environmental Management Practices for the Compressed Gas Industry
Harmonized with EIGA Doc 88/08 |
| P-38 | Guidelines for Devalving Cylinders |
| P-39 | Oxygen-Rich Atmospheres |
| P-40 | Calculation Method for the Analysis and Prevention of Overpressure During Refilling of Cryogenic Tanks with Rupture Disk(s) |
| P-41 | Locating Bulk Storage Systems in Courts |
| P-42 | Recommended Hose Management Practice for Compressed Gas Transfer Hoses |
| P-44 | Selection of Personal Protective Equipment
Harmonized with EIGA Doc 136/09 |
| P-45 | Fire Hazards of Oxygen and Oxygen-Enriched Atmospheres
Harmonized with EIGA Doc 04/09. |
| P-50 | Site Security Standard |
| P-51 | Transportation Security Standard for the Compressed Gas Industry |
| P-52 | Security Standard for Qualifying Customers Purchasing Compressed Gases |
| P-53 | Security Code Top Screen |
| P-55 | U.S. Environmental Regulations Inventory for Industrial Gas Operations |
| P-56 | Cryogenic Vaporization Systems—Prevention of Brittle Fracture of Equipment and Piping
Harmonized with EIGA Doc 133/05 |
| P-57 | Avoidance of Failure of Carbon Monoxide and of Carbon Monoxide/Carbon Dioxide Mixtures Cylinders
Harmonized with EIGA Doc 95/07 |
| P-59 | Prevention of Overpressure During Filling of Cryogenic Vessels
Harmonized with EIGA Doc 151/08 |
| P-60 | Guidelines for the Use of the North American Industrial Classification System and the Standard Industrial Classification Indices |
| P-61 | Ergonomic Guidelines for the Industrial and Medical Gas Industry |
| P-1F | Manutention Securitaire des Gaz Comprimes en Contenants, 2008 edition (P-1 French) |
| S-1.1 | Pressure Relief Device Standards-Part 1-Cylinders for Compressed Gases |
| S-1.2 | Pressure Relief Device Standards-Part 2-Portable Containers for Compressed Gases |
| S-1.3 | Pressure Relief Device Standards-Part 3-Stationary Storage Containers for Compressed Gases |
| S-7 | Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders |
| S-8 | Recommendations to Minimize Hazards of CG-7 Pressure Relief Valves and Ancillary Devices for Liquefied Petroleum Gas Cylinders |
| V-1 | Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connections
Includes:
Amendment 1 as of 3/3/06
Amendment 2 as of 9/29/09 |
| V-5 | Diameter Index Safety System (Noninterchangeable Low Pressure Connections for Medical Gas Applications) |
| V-6 | Standard Bulk Refrigerated Liquid Transfer Connections
1/19/2010 - Corrections made to Nitrous Oxide drawings Connection No. N2O-10 and Connection No. N2O-15. |
| V-6.1 | Standard Carbon Dioxide Transfer Connections (superseded by V-6)
Superseded by V-6, Standard Bulk Refrigerated Liquid Transfer Connections |
| V-7 | Standard Method of Determining Cylinder Valve Outlet Connections for Industrial Gas Mixtures |
| V-7.1 | Standard Method of Determining Cylinder Valve Outlet Connections for Medical Gases |
| V-9 | Compressed Gas Association Standard for Compressed Gas Cylinder Valves |
| V-10 | High Pressure Gas Trailer Connections |
| V-11 | General Guidelines for the Installation of Valves into High Pressure Aluminum Alloy Cylinders |
| V-12 | Leak Detection Fluids Use with Gas Cylinder Packages
Harmonized with EIGA Doc 78/08 |
