SAE Recently Published Standards 2011 - New, Revised, Reaffirmed, and Cancelled SAE Aerospace Documents August 2011

Document	Status	Title
AIR1168/11A	Stabilized	Spacecraft Boost and Entry Heat Transfer (STABILIZED Jul 2011)
AIR1168/12A	Stabilized	Spacecraft Thermal Balance (STABILIZED Jul 2011)
AIR1168/13A	Stabilized	Spacecraft Equipment Environmental Control (STABILIZED Jul 2011)
AIR1168/2A	Stabilized	Heat and Mass Transfer and Air-Water Mixtures (STABILIZED Jul 2011)
AIR1168/5A	Stabilized	Aerothermodynamic Test Instrumentation and Measurement (STABILIZED Jul 2011)
AIR1168/6A	Stabilized	Aircraft Fuel Weight Penalty Due to Air Conditioning (STABILIZED Jul 2011)
AIR1168/7A	Stabilized	Aerospace Pressurization System Design (STABILIZED Jul 2011)
AIR1168/8A	Stabilized	Aircraft Fuel Weight Penalty Due to Air Conditioning (STABILIZED Jul 2011)
AIR1168/9A	Stabilized	Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids (STABILIZED Jul 2011)
ARP1179D	Stabilized	Aircraft Gas Turbine Engine Exhaust Smoke Measurement (STABILIZED Jul 2011)
ARP1256D	Revised	Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
AIR1419A	Reaffirmed	Inlet Total-Pressure-Distortion Considerations for Gas-Turbine Engines
ARP1420B	Reaffirmed	Gas Turbine Engine Inlet Flow Distortion Guidelines
AS1730D	Revised	Coupling, Fuel, Rigid, Threaded Type
AS1985D	Revised	Fitting, Assembly, Adapter Ring Locked Port Connection to Flared Tube End
ARP4048	Reaffirmed	Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
ARP4050	Reaffirmed	Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
ARP4162A	Reaffirmed	Balancing Machine Proving Rotors
AS4361A	Cancelled	Minimum Performance Standards for Aerospace Electric Power Converters (Cancelled Jul 2011)
AS4984A	Revised	Coating Requirements for Aerospace Hand Tools
AIR5826	Reaffirmed	Distortion Synthesis/Estimation Techniques
AS6103	Issued	FITTING, CROSS, STANDARD AND REDUCER, 37 DEGREE SPHERICAL, FLARED
AS6115	Issued	FITTING ASSEMBLY,STRAIGHT, MALE FLARELESS, AXIALLLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6117	Issued	FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6119	Issued	FITTING ASSEMBLY, ELBOW, 90 DEGREES, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6120	Issued	FITTING ASSEMBLY,ELBOW, 45°, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6121	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6122	Issued	FITTING ASSEMBLY, STRAIGHT, BULKHEAD, FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
AS6123	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE BRANCH, HYDRAULIC, UP TO 1500 PSI
AS6158	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE BRANCH, HYDRAULIC, UP TO 1500 PSI
AS6159	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN, MALE FLARELESS ON SIDE, HYDRAULIC, UP TO 1500 PSI
ARP6161	Issued	Flight Compartment Glare
ARP6166	Issued	Minisimulator Method
AS6449	Issued	Solid Film Lubricant for Fluid Fittings in Oxygen, Potable Water, Hydraulic, and Other Systems
AS6450	Issued	Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Oxygen Systems
AS6457	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO MALE FLARELESS ON THE RUN, MALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
AS6458	Issued	FITTING ASSEMBLY, TEE, AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN, FEMALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
AS6554	Issued	Cargo Stopper Devices
AS7928/12B	Revised	Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Tin Whisker Resistant, Type II, Class 1 (For 105 °C Total Conductor Temperature)
AS9696D	Revised	Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .1900-32 UNJF-3A
AS16781A	Cancelled	Fiber Optics Test Methods and Instrumentation (Cancelled Jul 2011)
AS20708/131A	Revised	Synchro, Control Transmitter, Type 15CX4F (STABILIZED Jul 2011)
AS20708/39B	Revised	Synchro, Control Transformer, Type 19CTB4B
AS20708/500A	Revised	Synchro, Torque Receiver, Type 26V-10TR4 (STABILIZED Jul 2011)
AS20708/55A	Revised	Synchro, Torque Differential Transmitter, Type 23TDX6C (STABILIZED Jul 2011)
AS20708/56A	Revised	Synchro, Torque Receiver Transmitter, Type 23TRX6B
AS20708/62A	Revised	Synchro, Torque Receiver Transmitter, Type 31TRX4A
AS20708/66A	Revised	Synchro, Torque Receiver Transmitter, Type 31TRX6A
AS20708/67A	Revised	Synchro, Torque Differential Receiver, Type 31TDR6B (STABILIZED Jul 2011)
AS20708/68A	Revised	Synchro, Torque Differential Transmitter, Type 31TDX6C
AS20708/70A	Revised	Synchro, Torque Receiver Transmitter, Type 37TRX4A
AS20708/74A	Revised	Synchro, Torque Receiver Transmitter, Type 37TRX6A
AS20708/76A	Revised	Synchro, Torque Differential Transmitter, Type 37TDX6A (STABILIZED Jul 2011)
AS20708/78A	Revised	Synchro, Control Transmitter, Type 26V-08CX4C
AS20708/79A	Revised	Synchro, Control Transformer, Type 26V-08CT4C
AS20708/80A	Revised	Synchro, Control Differential Transmitter, Type 26V-08CDX4C
AS20708/81A	Revised	Synchro, Control Differential Transmitter, Type 11CDX4B
AS22759/49	Issued	Wire, Electrical, Fluoropolymer-Insulated, Crosslinked Modified ETFE, Low Fluoride, Normal Weight, 80 Microinch Silver-Coated, High-Strength Copper Alloy, 200 °C, 600 Volt
AS25036C	Revised	Terminal, Lug, Crimp Style, Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1 (For 105 °C Total Conductor Temperature)
AS25064A	Revised	Conduit, Flexible, Radio Frequency Shielding
AS25065A	Revised	Ferrule, Flexible Conduit, Radio Frequency Shielding
AS25066	Issued	CONDUIT ASSEMBLY, NUT, FLEXIBLE, RADIO FREQUENCY SHIELDING
AS25067A	Revised	Conduit Assembly, Flexible, Radio Frequency Shielding
AS25274A	Revised	Cap, Electrical (Wire End, Crimp Style, Type II, Class 1) for 105 °C Total Conductor Temperature
AS34001B	Stabilized	Connector, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type (STABILIZED Jul 2011)
AS34011A	Stabilized	Connectors, Receptacle, Electric, Cable Connecting, Front Release, Crimp Contact, AN Type (STABILIZED Jul 2011)
AS34041A	Stabilized	Connectors, Receptacle, Electric, Jam Nut Mounting, Front Release, Crimp Contact, AN Type (STABILIZED Jul 2011)
AS34061A	Stabilized	Connectors, Plug Electric, Front Release, Crimp Contact, An Type (STABILIZED Jul 2011)
AS81790A	Revised	Connectors, Receptacle, External Electric Power, Aircraft, General Specification For
AS81822A	Stabilized	Wire, Electrical, Solderless Wrap, Insulated and Uninsulated, General Specification For (STABILIZED Jul 2011)
AS81822/10A	Stabilized	Wire, Electrical, Solderless Wrap, Unisulated, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/1A	Stabilized	Wire, Electrical, Solderless Wrap, Polyethylene Terephthalate-Polyester Laminated Tape Insultation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/11A	Stabilized	Wire, Electrical, Solderless Wrap, Uninsulated, Gold Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/12A	Stabilized	Wire, Electrical, Solderless Wrap, Uninsulated, Tin Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/13A	Stabilized	Wire, Electrical, Solderless Wrap, Extruded Ethylene-Tetrafluoroethylene (ETFE) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/15A	Stabilized	Wire, Electrical, Solderless Wrap, Extruded Ethylene-Chlorotrifluoroethylene (ECTFE) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/3A	Stabilized	Wire, Electrical, Solderless Wrap, Extruded Polyvinyidene Fluoride (PVDF) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/4A	Stabilized	Wire, Electrical, Solderless Wrap, Polyimide Coating Over Extruded Polytetrafluoroethylene (PTFE) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/5A	Stabilized	Wire, Electrical, Solderless Wrap, Fluorocarbon Polyimide Tape and Polytetrafluoroethylene (PTFE) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/6A	Stabilized	Wire, Electrical, Solderless Wrap, Extruded Polytetrafluoroethylene (PTFE) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/7A	Stabilized	Wire, Electrical, Solderless Wrap, Polyimide Jacket Over Extruded Polyvinyl Chloride (PVC) Insulation, Tin Coated Solid Conductor (STABILIZED Jul 2011)
AS81822/8A	Stabilized	Wire, Electrical, Solderless Wrap, Polyimide Jacket Over Extruded Fluorinated Ethylene Propylene (FEP) Insulation, Silver Coated Solid Conductor (STABILIZED Jul 2011)
AS81969	Issued	Installing and Removal Tools, Connector Electrical Contact, General Specification For
AS85049/80C	Revised	Connector Accessories, Electrical, Dummy Contact, Sizes 16, 12 and 8, Category 7 (For MIL-DTL-38999 Connectors)
AS91101B	Revised	Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 KSI Min, .1900-32 UNJF-3A
AS91111B	Revised	Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 Ksi Min, .2500-28 UNJF-3A

Para maiores informações:

Por favor, entre em contato:

Email: jhecker@uol.com.br
Linkedin: heckerjf
Twitter: @heckerjf
Facebook: PubIntl

SAE International revises its standards classification system - December 2010 - Updates 2011 / 2012

In an effort to improve its standards classification system, and to reduce confusion for standards users, SAE International has restructured and simplified its system.

With the implementation of the new SAE International Standards Classification System, every SAE standard will be published with a classification label and a clear definition of the classification. The change entails the elimination and combination of certain classifications and the addition of others. The categories of "Non-Current," "Amendment" and "Re-Issued" have been eliminated, while a "Stabilized" category has been added.

With these changes, SAE takes a step to address the lack of consistency among the many Standards Developing Organizations (SDOs) with respect to the nomenclature used to designate classifications of standards. A recent survey of just eight SDOs identified over 20 different categories of standards. As a result of this vast array of categories, the actual definitions of the many classifications in use are often found to be unclear and confusing to standards users.

 Following are the definitions of the new SAE standards categories:

- Issued - The first time a technical report is published.

- Revised - An active technical report has been updated and re-published.

- Reaffirmed - A technical report which has been reviewed by the technical committee and determined to be current with no need for immediate revision.

- Stabilized - A technical report that has been 'frozen' at the last active revision level.

- Cancelled - A technical report that is deemed to be 'not fit for use' due to technical reasons or when its technical requirements are totally superseded by another document.

Reasons that a document may be "Stabilized" include if it covers technology, products, or processes which are mature and not likely to change in the foreseeable future; if it covers technology, products, or processes for which a technical expertise no longer resides in the owning committee; or if the standard development committee cannot find users for it.

The following criteria will apply to a status of "Cancelled:"

-  Cancelled technical report will carry a clear rationale statement and, if at all possible, will direct users to alternative technical reports.

- A technical report shall not be cancelled based only on administrative reasons such as no identified use, existence of newer technology, or no committee expertise, etc.

- Determination that a document is not fit for use may be made when there is a clear safety issue with continued use, or when there has been a government requirement that can only be accommodated by elimination of the document.

Instituto Nacional de Normalización (INN) Chileno - Normas Chilenas - Venta de Normas - Venda de Normas - 2011 / 2012 - Compre via Brasil

El Instituto Nacional de Normalización dispone de un Centro de Consulta Digital con un banco de 3000 normas chilenas, más de 180000 normas extranjeras e internacionales y publicaciones sobre sistemas de gestión de la calidad.

El Instituto Nacional de Normalización tiene como principales líneas de trabajo la elaboración y difusión de las normas chilenas (NCh), la evaluación de la conformidad, la coordinación de la Red Nacional de Metrología y la capacitación en materias de sistemas de gestión de la calidad y normas específicas. Lo anterior con el fin de fortalecer los componentes de la calidad nacional, favoreciendo su competitividad en el mercado tanto interno como a nivel internacional.

Verband Der Automobilindustrie - VDA 6.3 - Band 6 Teil 03 2010 - Band 6 Teil 03 Prozessaudit 2. vollständig überarbeitete Auflage, Juni 2010

Band 6 Teil 03 Prozessaudit 2. vollständig überarbeitete Auflage, Juni 2010

Der etablierte Audit Standard VDA 6.3 (Ausgabe 1998) wurde komplett überarbeitet. Zielsetzung war die Neuordnung, Präzisierung und Anpassung des Prozessaudits an die geänderten Anforderungen in der Automobilindustrie.

Prozesse sind so zu analysieren, dass Risiken und Schwächen in den

Arbeitsabläufen sowie in deren Schnittstellen erkannt werden.

Der Teil A (Ausgabe 1998) wurde vollständig überarbeitet und um weitere Prozesselemente wie Potenzialanalyse und Projektmanagement ergänzt. Der Teil B (Ausgabe 1998) wurde inhaltlich präzisiert und ergänzt, mit dem Ziel einer möglichst hohen Wiedererkennbarkeit.

Die Abstufungsregeln bei der Bewertung wurden erweitert, Fragen mit besonderem Produkt- und Prozessrisiko (*-Fragen) gekennzeichnet und die Einstufung auf A, B und C reduziert.

Essential VDA (Verband der Automobilindustrie e. V. Standards and their titles:

VDA 6.1: QM System Audit
VDA 6.2: QM System Audit for Services
VDA 6.3: Process Audit
VDA 6.4: System Audit Production Equipment
VDA 6.5: Product Audit

Verein Deutscher Giessereifachleute - VDG Merkblatt P 690 01 Jul 2010 - FEINGUSS - Maßtoleranzen, Oberflächen, Bearbeitungszugaben

The VDG is the technical-scientific community organization of the German foundry industry and represents the interests of the entire industry, supports research and development and provides numerous services.

The VDG is the technical-scientific community organization of the German foundry industry and represents the interests of the entire industry, supports research and development and provides numerous services.

INHALT

1 Normative Verweisungen S.1
2 Definition und Geltungsbereich S.2
3 Zweck S.2
4 Maßgenauigkeit S.3
5 Maßtoleranzen S.5
6 Oberflächenbeschaffenheit S.9
7 Bearbeitungszugaben S.9
8 Ergänzende Hinweise S.9

9 Weiterführende Informationen S.10

Mit Stand Juli 2010 ist die BDG-Richtlinie (VDG-Merkblatt) P690: Feinguss – Maßtoleranzen, Oberflächen, Bearbeitungszugaben erschienen. Das Feingießverfahren ist ein industrielles Präzisionsgießverfahren, das in Abgrenzung zu anderen formgebenden Verfahren unter Verwendung eines ausschmelzbaren Modells (verlorenes Modell) eine ungeteilte keramische Form (verlorene Form) erstellt. In diese werden Metalle und Legierungen auf Eisen-, Aluminium-, Nickel-, Cobalt-, Titan-, Kupfer- und Magnesiumbasis abgegossen. Die so hergestellten Gussteile zeichnen sich durch eine besondere Oberflächengüte und Maßgenauigkeit aus.

Das mit Stand Juli 2010 überarbeitete Merkblatt definiert Maßtoleranzen, nennt Bearbeitungszugaben und Oberflächenrauheiten, die dem Stand der Feingießtechnik entsprechen. Es dient als Grundlage für eine optimale wirtschaftliche Zusammenarbeit zwischen den Feingussproduzenten und den Feingussabnehmer.

Instituto Nacional de Normalización (INN) - Normas Chilenas aprobadas por INN: julio 2011 ( NCh 700 ; NCh 3238 ISO 9261 ; NCh ISO 19115 ; NCh ISO19115/2 )

Normas Chilenas aprobadas por el Consejo del INN en el mes de julio de 2011, de manera de mantenerlo informado de las novedades en materia de normalización técnica:

NCh700-2011
Grifería sanitaria - Requisitos y métodos de ensayo

NCh3238-2011 ISO 9261:2004
Equipos agrícolas para riego - Goteros y tuberías de goteo - Especificaciones y métodos de ensayo

NCh-ISO19115-2011
Información geográfica - Metadatos

NCh-ISO19115/2-2011
Información geográfica - Metadatos - Parte 2: Extensiones para imágenes y datos de grilla

NBBPVI - National Board of Boiler and Pressure Vessel Inspectors - ANSI/NBBPVI NB23-2011 National Board Inspection Code - NBIC 2011 Edition (Three Volumes) / ( Available in the traditional hard copy format, the 2011 NBIC is also available on a Flash Drive) + 2011 Edition NBIC Erratum

An American National Standard (ANSI), the National Board Inspection Code (NBIC) provides rules and guidelines for the installation, inspection, repair and alteration of boilers, pressure vessels and pressure relief devices. It is required in many United States and Canadian jurisdictions.

Available in the traditional hard copy format, the 2011 NBIC is also available on a Flash Drive.

Important Note: All National Board Stamp Holders are required to have the complete set.

Hard Copy

The book may be purchased as a complete set or any part individually, allowing inspectors to purchase only the section required.

- NBIC hard copy edition (complete set)
- Part 1 - Installation
- Part 2 - Inspection
- Part 3 - Repair/Alteration

plus shipping and handling

Flash Drive

The 2011 NBIC is also available on a compact, searchable flash drive.

- NBIC Flash Drive edition (licensed for a single user only)

plus shipping and handling

2011 Edition NBIC Erratum Notice

Erratum for the 2011 Edition of the National Board Inspection Code (NBIC) concerns a statement regarding when the 2011 Edition of the NBIC becomes mandatory.

The following information was inadvertently omitted from the printed publication:

Editions

Editions, which include revisions and additions to this Code, are published every two years. Editions are permissive on the date issued and become mandatory six months after the date of issue.

Para maiores informações:

Por favor, entre em contato:

Email: jhecker@uol.com.br

Linkedin: heckerjf

Twitter: @heckerjf

Facebook: PubIntl

ABNT NBR IEC 60079-18:2010 Atmosferas explosivas Parte 18: Proteção de equipamento por encapsulamento “m” (em portugues - Brasil)- Identica a : IEC 60079-18:2009 Explosive atmospheres Part 18: Equipment protection by encapsulation “m”

Esta parte da ABNT NBR IEC 60079 contém requisitos específicos para a construção, ensaios e marcação de equipamentos elétricos, partes de equipamentos elétricos e componentes “Ex” com o tipo de proteção por encapsulamento “m”, destinados a utilização em atmosferas explosivas de gás ou poeiras.

Kirk-Othmer Encyclopedia of Chemical Technology, 27 Volume Set, 5th Edition , March 2004 , Hardcover , 22950 pages , ( ISBN: 978-0-471-48494-3 )

The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949.

The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field.

The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information.

* Set begins publication in January 2004
* Over 1000 articles
* More than 600 new or updated articles
* 27 volumes

Among the additions to the Encyclopedia are articles on advanced concepts, methods, and technology including Supramolecular Chemistry, Polymer Dispersions, Chemoinformatics, Combinatorial Chemistry; as well as articles on environmentally conscious chemical technology (Green Chemistry, Arsenic - Environmental Impact, Health Effects, and Treatment Methods, Biomass Energy, Indoor Air Pollution and Control, Zero Waste);

Processes (Chemical Product Design, Process Integration Technology, Pervaporation);
Catalysis (Metallocene Catalysts, Ziegler-Natta Catalysts, Biocatalysis);
Materials (Fullerenes, Biobased Polymers, Shape Memory Polymers, Hybrid Nanocomposite Materials);

Analytical techniques and instrumentation (HPLC, GC, Affinity Chromatography, AFM);
Pharmaceuticals (Antibiotic Resistance, Oxazolidinones); and Business Development (Technology Transfer, Advanced Materials - Economic Evaluation).

ULLMANN's Encyclopedia of Industrial Chemistry - 7th Edition; 40 Volume Set, in Print - August \ October 2011, Hardcover , ( ISBN: 978-3-527-32943-4 ) ; 29456 pages

The ULLMANN’S Encyclopedia of Industrial Chemistry, the world's largest reference in applied chemistry, industrial chemistry, and chemical engineering.

With 30,000 pages of content written by more than 3,000 experts from the top chemical companies and research institutes, ULLMANN’S Encyclopedia is the number one resource for any query or question concerning chemicals, processes, physical and chemical data, and much more.

Fully international in scope and coverage, the contents have been compiled under the supervision of a renowned global Editorial Advisory Board. Now containing 1,050 major articles, with more than 16 million words, nearly 15,000 tables, 25,000 figures, and innumerable literature sources and cross-references, ULLMANN’S Encyclopedia offers a wealth of comprehensive and well-structured information on all facets of industrial chemistry.

ULLMANN’S topics include:

- Agrochemicals
- Analytical Techniques
- Biochemistry & Biotechnology
- Chemical Reactions
- Dyes and Pigments
- Energy
- Environmental Protection, Industrial Safety
- Fat, Oil, Food and Feed, Cosmetics
- Inorganic Chemicals
- Materials
- Metals and Alloys
Organic Chemicals
- Pharmaceuticals
- Polymers and Plastics
- Processes & Process Engineering
- Renewable Resources
- Special Topics

ASME B18.18 - 2011 : Quality Assurance for Fasteners - Issued on April 14, 2011 *** [ Revision and Consolidation of : B18.18.1-2007 , B18.18.2-2009 , B18.18.3M-1987(R2005) , B18.18.4M-1987(R2005) , B18.18.5M-1998(R2009) , B18.18.6M-1998(R2009) , B18.18.7M-1998(R2009) ] , ISBN: 9780791833421

Publisher: ASME
Publish Date: 2011
Pages: 20
Language: English
ISBN: 9780791833421

B18.18-2011, Quality Assurance for Fasteners Issued on April 14, 2011 Incorporated into it is:

B18.18.1-2007, Inspection and Quality Assurance for General Purpose Fasteners
B18.18.2-2009, Inspection and Quality Assurance for High-Volume Machine Assembly
Fasteners
B18.18.3M-1987(R2005), Inspection and Quality Assurance for Special Purpose
Fasteners
B18.18.4M-1987(R2005), Inspection and Quality Assurance for Highly Specialized
Engineered Applications
B18.18.5M-1998(R2009), Inspection and Quality Assurance Plan Requiring In-Process
Inspection and Control
B18.18.6M-1998(R2009), Quality Assurance Plan for Fasteners Produced in A Third
Party Accreditation System
B18.18.7M-1998(R2009), Quality Assurance Plan for Fasteners Produced in A Customer Approved Control Plan

Description
This Quality focused standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. The standard identifies four categories, recognizing that fastener users have widely varying requirements. The 4 categories covered are:

Category 1 is a receiving inspection plan for purchasers.
Category 2 utilizes documented and verifiable in-process controls structured at the producer’s discretion.
Category 3 utilizes documented and verifiable in-process controls structured at the producer’s discretion.
Category 4 includes all of the requirements of Category 2 plus a 100% inspection for a specific feature or features.

In the preparation of this standard it was recognized that its function must enable it to be a part of the various regimens in use today that attain certain quality levels of products. This standard was written to encompass frameworks that enable the users of this standard to pinpoint which category they wish to use in meeting their own objectives.

Riviste Collezioni Bambini Magazine - Subscribe for 1 year (2 issues) - ISSN : 1120-1983 - Assinatura Brasil 2011 / 2012

Categoria :MODA BAMBINI
Periodicità : SEMESTRALE
Formato : 29 x 22 cm
Paginazione media : 80
Peso medio :1490 (Gr.)
ISSN : 1120-1983
Nazionalità :ITALIA
Testo :ITALIANO/INGLESE
La rivista specializzata più completa dedicata alla moda per bambini dai 4 ai 14 anni. Tutte le tendenze da Italia, Francia, Spagna, Germania.

The most complete specialised magazine dedicated to fashion for children from age 4 to 14. The latest fashions from Italy, France, Spain and Germany. 2 issues per year.

ASME Boiler and Pressure Vessel Code - BPVC 2010 - Section I. Power Boilers - Section II. Materials - Section III. Rules for Construction of Nuclear Power Plant Components - Section IV. Heating Boilers - Section V. Nondestructive Examination - Section VI. Recommended Rules for the Care and Operation of Heating Boilers - Section VII. Recommended Guidelines for the Care of Power Boilers - Section VIII. Pressure Vessels - Division 1 - Section IX. Welding and Brazing Qualifications - Section X. Fiber-Reinforced Plastic Pressure Vessels - Section XI. Rules for Inservice Inspection of Nuclear Power Plant Components - Section XII. Rules for the Construction & Continued Service of Transport Tanks - Code Cases: Boilers & Pressure Vessels - Code Cases: Nuclear Components - American Society of Mechanical Engineers - Next Edition in July 2013 - Print / Online / PDF / Binder - Order Now

Boiler and Pressure Vessel Code - 2010 Edition

Section I. Power Boilers
Section II. Materials
Section III. Rules for Construction of Nuclear Power Plant Components
Section IV. Heating Boilers
Section V. Nondestructive Examination
Section VI. Recommended Rules for the Care and Operation of Heating Boilers
Section VII. Recommended Guidelines for the Care of Power Boilers
Section VIII. Pressure Vessels - Division 1
Section IX. Welding and Brazing Qualifications
Section X. Fiber-Reinforced Plastic Pressure Vessels
Section XI. Rules for Inservice Inspection of Nuclear Power Plant Components
Section XII. Rules for the Construction & Continued Service of Transport Tanks
Code Cases: Boilers & Pressure Vessels
Code Cases: Nuclear Components

About the Code

The International Boiler and Pressure Vessel Code establishes rules of safety governing the design, fabrication, and inspection of boilers and pressure vessels, and nuclear power plant components during construction.

The objective of the rules is to provide a margin for deterioration in service. Advancements in design and material and the evidence of experience are constantly being added.

Serving the Public for almost 100 Years

Originating in 1914, the ASME Boiler and Pressure Vessel Code is now adopted in part or in its entirety, by all 50 states and numerous municipalities and territories of the United States and all the provinces of Canada.

Current and "LIVE"

The Code is kept current by the Boiler and Pressure Committee, a volunteer group of more than 950 engineers. The Committee meets regularly to consider requests for interpretations, revision, and to develop new rules.

In the formulation of its rules and in the establishment of maximum design and operating pressures, the Committee considers technological advances including materials, construction, methods of fabrication, inspection, certification, and overpressure protection.

Automatic 3-Year Update Service Addenda

Any Addenda published will be sent automatically to purchasers of the applicable Sections up to the publication of the 2013 Code.

Any page affected by the Addenda is reprinted totally. Changes are incorporated into the appropriate page and additional pages are provided for overflow material. Each affected area is identified with a designator corresponding to the Addenda issue date. The designators remain on the pages in subsequent Addenda, enabling the user to identify those areas affected by more than one Addenda.

Each Addenda includes a Summary of Changes that lists the pages being replaced or added, the material affected by the Addenda, and the nature of the change.

Attention: All Sections, Addenda, Interpretations, and Supplements are issued in loose-leaf format.

Interpretations

ASME issues written replies to inquiries concerning interpretation of technical aspects of the Code. The Interpretations for each individual Section will be published separately and will be included with the update service to that Section; up to the publication of the 2013 Code. Interpretations of Section III, Divisions 1 and 2 will be included with the update service to Subsection NCA. Interpretations are not part of the Code or Addenda.

Code Case Supplements

Code Cases clarify the intent of existing requirements or provide, when the need is urgent, rules for materials or constructions not covered by existing Code rules. Cases will appear in the applicable Code Cases book: "(1)" Boilers and Pressure Vessels or "(2)" Nuclear Components. Supplements will be sent automatically four times per year to the purchasers of the Code Cases books up to the publication of the 2013 Code.

General Standard for Food Additives - Norme générale pour les additifs alimentaires - Norma general para los aditivos alimentarios. GFSA 2010. Codex Alimetarius (CD-ROM) - Rome, 2010, CD, Multilingual (Ch/En/Es/Fr) ISBN 978-92-5-006685-1

The "Codex General Standard for Food Additives" sets forth the conditions under which permitted food additives may be used in all foods. This database provides, in a searchable format, all the provisions for food additives that have been adopted by the Codex Alimentarius Commission. Provisions are searchable by food additive (name, synonym, INS number), by functional class and by food category.

CODEX ALIMENTARIUS CD-ROM 2009. International Food Standards - CODEX ALIMENTARIUS CD-ROM 2009. Normes internationales pour les aliments. FAO/OMS - Trilingue (En/Fr/Es) - Publication Date: June 2010. (ISBN: 9789250064512) - Food and Agriculture Organization (FAO) 2011 - International Food Standards - Normes internationales pour les aliments - Normas internacionales para los alimentos.

The Codex Alimentarius Commission, established in 1962 by the Food and Agriculture Orgaization of the United Nations (FAO) and the World Health Organization (WHO), is a United Nations body that sets international food standards. With more than 170 member countries, the Commission is a worldwide forum on food safety, consumer protection and fair practices in the food trade.

The Codex Alimentarius is a continuously updated guide for governments and other interested parties on the regulatory framework needed for food control systems, food safety and consumer protection. The international standards contained in the Codex Alimentarius are recognized as benchmarks by the World Trade Organization (WTO).

The Codex Alimentarius (food code) is the single, most important global reference point for consumers, food producers and processors, national food control agencies and the international food trade. This CD-ROM contains over 400 international standards, guidelines and codes of practice, recognized as benchmarks by the World Trade Organization, on food labelling and food hygiene; commodities; and food safety assessment for food derived from biotechnology, adopted by the Commission up to 2009, together with a fully searchable record of the joint FAO/WHO Codex
Alimentarius Commission meeting reports for the past five years. June 2010. CD-ROM. ISBN: 9789250064512.

Over 400 standards, guidelines and codes of practice have been adopted to date on:

- Food labelling and crop hygiene
- Commodities
- Food safety assessment for food derived from biotechnology
- Methods of analysis and sampling, food inspection and certification procedures

This CD-ROM contains these texts - in English, French and Spanish - together with a fully searchable record of Codex Alimentarius Commission meetings and reports for the five past years. The Codex Alimentarius numerical standards for maximum limits for food additives, pesticide residues and veterinary drug residues in food are published separately.

Minimum system requirements: Pentium PC, 128 MB RAM, Windows 98/2000/XP. Suitable Internet browser.