Review Schedule for TAPPI Standards 2011
T 808 om-07 Flat crush test of corrugated board (flexible beam method) (May 10, 2011)
T 811 om-07 Edgewise compressive strength of corrugated fiberboard (short column test) (May 17, 2011)
T 822 om-07 Ring crush of paperboard (rigid support method) (June 7, 2011)
T 449 om-07 Bacteriological examination of paper and paperboard (June 10, 2011)
T 281 sp-07 Open drum washer mat sampling technique (June 14, 2011)
T 252 om-07 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard (June 17, 2011)
T 211 om-07 Ash in wood, pulp, paper and paperboard: combustion at 525°C (June 21, 2011)
T 1212 sp-07 Light sources for evaluating papers including those containing fluorescent whitening agents (June 24, 2011)
T 1214 sp-07 Interrelation of reflectance, R0; reflectivity, R∞ ; TAPPI opacity, C0.89; scattering, s; and absorption, k (June 28, 2011)
T 1217 sp-07 Photometric linearity of optical properties instruments (July 8, 2011)
T 1218 sp-07 Calibration of reflectance standards for hemispherical geometry (July 12, 2011)
T 575 om-07 Roughness of paper and paperboard, stylus (Emveco-type) method (July 15, 2011)
T 530 om-07 Size test for paper by ink resistance (Hercules-type method) (July 19, 2011)
T 512 sp-07 Creasing of flexible packaging material paper specimens for testing (July 22, 2011)
T 547 om-07 Air permeance of paper and paperboard (Sheffield method) (July 26, 2011)
T 277 om-07 Macro stickies content in pulp: the “pick-up” method (July 29, 2011)
T 240 om-07 Consistency (concentration) of pulp suspensions (August 2, 2011)
T 212 om-07 One percent sodium hydroxide solubility of wood and pulp (August 5, 2011)
T 559 cm-02 Grease resistance test for paper and paperboard (August 9, 2011)
T 665 cm-02 Analysis of talc (August 12, 2011)
T 483 cm-02 Odor of packaging materials (August 16, 2011)
T 433 cm-02 Water resistance of sized paper and paperboard (dry indicater method) (August 19, 2011)
T 234 cm-02 Coarseness of pulp fibers (August 23, 2011)
T 257 cm-02 Sampling and preparing wood for analysis (August 26, 2011)
T 552 om-07 Determination of wetting tension of polyolefin films and coated surfaces via the mayer rod technique (August 30, 2011)
T 802 om-07 Drop test for fiberboard shipping containers (September 2, 2011)
T 815 om-07 Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid fiberboard) (inclined plane method) (September 9, 2011)
T 834 om-07 Determination of containerboard roll hardness (September 13, 2011)
T 832 om-07 Water absorption of corrugating medium: float curl method (September 16, 2011)
T 838 om-07 Edge crush test using neckdown (September 20, 2011)
T 1200 sp-07 Interlaboratory evaluation of test methods to determine TAPPI repeatability and reproducibility (September 23, 2011)
T 527 om-07 Color of paper and paperboard (d/0, C/2) (October 7, 2011)
T 524 om-07 Color of paper and paperboard (45/0, C/2) (October 11, 2011)
T 1219 sp-07 Storage of paper samples for optical measurements and color matching (October 14, 2011)
T 653 om-07 Specular gloss of paper and paperboard at 20° (October 18, 2011)
T 1215 sp-07 The determination of instrumental color differences (October 21, 2011)
T 1216 sp-07 Indices for whiteness, yellowness, brightness, and luminous reflectance factor (October 25, 2011)
T 536 om-07 Resistance of paper to passage of air (high-pressure Gurley method) (November 8, 2011)
T 568 om-07 Physical area of sub-visible contraries in pulp, paper, and paperboard by image analysis (November 11, 2011)
T 275 sp-07 Screening of pulp (Somerville-type equipment) (November 18, 2011)
T 271 om-07 Fiber length of pulp and paper by automated optical analyzer using polarized light (December 2, 2011)
T 282 pm-07 Hexeneuronic acid content of chemical pulp (December 9, 2011)
TAPPI is pleased to announce that its first effort in submitting TAPPI Standards to become American National Standards has been successful. Sixteen Standards were eligible for this distinction and approved for submission by the Quality and Standards Management Committee. They have been approved by ANSI as American National Standards.
Thanks are due to our dedicated volunteers who contributed time and effort to enable TAPPI’s accreditation as a national standards developer. Appreciation is also extended to those who regularly help reviewing and developing these standards in accordance with our guidelines. You dedication and activity are a credit both to TAPPI and the industries we serv
ANSI Approves 16 TAPPI Standards
T 200 sp-10 Laboratory beating of pulp (Valley beater method)
T 213 om-10 Dirt in pulp - chart method
T 220 sp-10 Physical testing of pulp handsheets
T 454 om-10 Turpentine test for voids in glassine and greaseproof papers
T 465 sp-10 Static creasing of paper for water vapor transmission tests
T 546 om-10 Machine-direction grammage variation measurement (gravimetric method)
T 558 om-10 Surface wettability and absorbency of sheeted materials using an automated contact angle tester
T 1006 sp-10 Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, air permeability, and thickness
T 1007 sp-10 Sample location for fiber glass mat sheets
T 1008 sp-10 Test conditions for fiberglass mat test methods
T 1009 om-10 Tensile strength and elongation at break for fiber glass mats
T 1012 om-10 Moisture content of fiber glass mats
T 1013 om-10 Loss on ignition of fiber glass mats
T 1014 om-10 Moisture sensitivity of fiber glass mats
T 1015 om-10 Fiber glass mat uniformity (visual defects)
T 1016 om-10 Average fiber diameter of fiber glass mats
---------------------------------------------------------------------------------
If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.
If you would like to request an invoice, please send us an email message.
We’re always ready to help you out.
Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.
Estamos sempre prontos a ajudá-los.
If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.
If you would like to request an invoice, please send us an email message.
We’re always ready to help you out.
---------------------------------------------------------------------------------
Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações. Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.
Estamos sempre prontos a ajudá-los.
---------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
