A completely revised and updated version of the BSSA Guide to Stainless Steel Specifications
has been published. The first edition was published in 2003 and since then there have been
a number of significant changes to the most frequently used stainless steel standards for flat
and long products and new standards for tubular products. This latest edition is updated with
these changes and also includes some additional standards for the first time.
The major changes in the new edition are:
Latest versions of::
EN 10028-7 - Stainless steel flat products for pressure vessels
EN 10088-2 - Stainless steel flat products for general purposes
EN 10088-3 - Stainless steel long products for pressure vessels
EN 10088-4 - Stainless steel flat products for construction purposes
EN 10088-5 - Stainless steel long products for construction purposes
EN 10272 - Stainless steel long products for pressure purposes
EN 10302 - Creep resisting steels
EN ISO 3506 - Stainless steel fasteners
BS 6744 - Stainless steel rebar
Standards published since the first edition or not included in first edition
EN 10213-4 - Stainless steel castings for pressure purposes
EN 10216-5 - Stainless steel seamless tubes for pressure purposes
EN 10217-7 - Stainless steel welded tubes for pressure purposes
EN 10253-3 - Stainless steel butt weld pipe fittings
EN 10253-4 - Stainless steel butt weld pipe fittings
EN 10264-4 - Stainless steel for wire ropes
EN 10295 - Heat resistant steel castings
EN 10296-2 - Stainless steel welded tubes for general purposes
EN 10297-2 - Stainless steel seamless tubes for general purposes
Standards included which have not been changed since the first edition are:
EN 1600 - Stainless steel MMA electrodes
EN 10090 - Valve steels
EN 10095 - Heat resisting steels
EN 10151 - Stainless steel strip for springs
EN 10222-5 - Stainless steel forgings for pressure purposes
EN 10250-4 - Stainless steel forgings for general purposes
EN 10263-5 - Stainless steel wire for cold heading and extrusion
EN 10269 - Fasteners for elevated and low temperature service
EN 10270-3 - Stainless steel wire for springs
EN 10283 - Corrosion resistant steel castings
EN 12072 - Stainless steel welding consumables
EN 12073 - Stainless steel flux cored electrodes
BS 3100 - Stainless steel castings
BS 3146 - Stainless steel investment castings
In addition, there is a more comprehensive look-up table between EN numbers and UNS numbers.
Monday, November 29, 2010
EEF Steel specifications: 13th edition ; [UK Steel]; 2010
New Steel Specifications Handbook Published by UK Steel.
Steel Specifications 13th Edition is the essential reference tool for engineers, architects, designers and material scientists.
All the latest steel standards - all in one place.
With more than 80 of the 207 principal standards updated, and 13 new standards added - it has all the information you need to specify, procure or supply steel.
Published by UK Steel, this comprehensive catalogue is cross-referenced by application, property and supplier and includes:
- The data you need with notes providing qualification and explanation plus an index to help you find steel grade standards.
- The chemical and mechanical composition as well as the physical properties of British/European standard steels and most of the popular US steel standards.
- Essential contact details of UK Steel producers and organisations which can provide advice on “equivalents” and on steel usage in particular applications.
- Helpful and easy-to-follow information on steel designation systems and the steel standards process.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
---------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
Friday, November 26, 2010
TRA Yearbook 2011 (Tire and Rim Association)
The TRA Yearbook 2011 will be published until Feb-late March, 2011.
Every year they publish the TRA Yearbook, which contains all TRA standards and related information approved by the Association. These standards include:
- Tire Designations
- Tire Load Ratings
- Dimensions
- Approved
- Rim Widths
- The Design Rim or Measuring Rim
TRA YEAR BOOK
The YEAR BOOK contains all TRA Standards and related information approved by the Association for tires, rims and allied parts for ground vehicles. These Standards include tire designations; tire load ratings and dimensions; approved rim contour(s) and valve(s) for each tire size; rim contour dimensions; valve dimensions; and other data and notes necessary for tire/rim/valve interchangeability. This Year Book is also available on CD ROM.
TRA CD-ROM
The TRA CD-ROM contains the Year Book and Aircraft Year Book. It also contains an Access database of all of the pneumatic tires in Sections 1 thru 7 of the Year Book. This CD Rom is available for single-user license and multi-user (maximum 5) license.
The TRA CD-ROM contains the Year Book and Aircraft Year Book. It also contains an Access database of all of the pneumatic tires in Sections 1 thru 7 of the Year Book. This CD Rom is available for single-user license and multi-user (maximum 5) license.
Available in:
- TRA 2011 Year Book. Print Edition
- TRA 2011 Year Book on CD ROM - single user or multiple users (max 5 users).
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
---------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
Every year they publish the TRA Yearbook, which contains all TRA standards and related information approved by the Association. These standards include:
- Tire Designations
- Tire Load Ratings
- Dimensions
- Approved
- Rim Widths
- The Design Rim or Measuring Rim
TRA YEAR BOOK
The YEAR BOOK contains all TRA Standards and related information approved by the Association for tires, rims and allied parts for ground vehicles. These Standards include tire designations; tire load ratings and dimensions; approved rim contour(s) and valve(s) for each tire size; rim contour dimensions; valve dimensions; and other data and notes necessary for tire/rim/valve interchangeability. This Year Book is also available on CD ROM.
TRA CD-ROM
The TRA CD-ROM contains the Year Book and Aircraft Year Book. It also contains an Access database of all of the pneumatic tires in Sections 1 thru 7 of the Year Book. This CD Rom is available for single-user license and multi-user (maximum 5) license.
The TRA CD-ROM contains the Year Book and Aircraft Year Book. It also contains an Access database of all of the pneumatic tires in Sections 1 thru 7 of the Year Book. This CD Rom is available for single-user license and multi-user (maximum 5) license.
Available in:
- TRA 2011 Year Book. Print Edition
- TRA 2011 Year Book on CD ROM - single user or multiple users (max 5 users).
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
---------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
ETRTO Standards Manual 2011 (European Tyre and Rim Technical Organisation) \ (in English with notes in French and German)
The Standards Manual will be available mid-February 2011.E.T.R.T.O. was founded in October 1964 but previously, from 1956 to 1964, it was known as the European Tyre and Wheel Technical Conference (ETWTC). Its principal objects, as stated in the current E.T.R.T.O.Constitution dated October 2008, are as follows :
To further align of national standards and ultimately to achieve interchangeability of pneumatic tyres, rims and valves in Europe as far as fitting and use are concerned.
To establish common engineering dimensions, load / pressure characteristics and operational guidelines.
To promote the free exchange of technical information appertaining to pneumatic tyres, rims and valves.
Since tyres are recognised as making a major contribution to road safety, E.T.R.T.O. is active in its contacts with national and international organisations and legislative bodies in order to make appropriate recommendations. However, the activities of E.T.R.T.O. are strictly confined to technical aspects of tyres, rims and valves as far as fitting and use are concerned.
E.T.R.T.O. was founded in October 1964 but previously, from 1956 to 1964, it was known as the European Tyre and Wheel Technical Conference (ETWTC). Its principal objects, as stated in the current E.T.R.T.O.Constitution dated October 2008, are as follows :
- To further align of national standards and ultimately to achieve interchangeability of pneumatic tyres, rims and valves in Europe as far as fitting and use are concerned.
- To establish common engineering dimensions, load / pressure characteristics and operational guidelines.
- To promote the free exchange of technical information appertaining to pneumatic tyres, rims and valves.
Since tyres are recognised as making a major contribution to road safety, E.T.R.T.O. is active in its contacts with national and international organisations and legislative bodies in order to make appropriate recommendations. However, the activities of E.T.R.T.O. are strictly confined to technical aspects of tyres, rims and valves as far as fitting and use are concerned.
E.T.R.T.O. Standards are specifications of international interest, including future developments, approved in accordance with the Organisation's Constitution and Rules of Procedure. Although not exclusive, they are based on sound knowledge and experience and will enable users to obtain good services from their tyres/rims/valves, but as they give only general advice, they cannot take into account special conditions of use and every different type of vehicle.
In consequence, the application of E.T.R.T.O. Standards does not absolve the user of them from any product liability responsibilities or legal obligations that may be required and which may vary from country to country. Further, E.T.R.T.O. does not accept any responsibility for the infringement of patents relating to the data for tyres/rims/valves specified as E.T.R.T.O. Standards in this publication.
STANDARDS MANUAL
- General Information
- Passenger Car Tyres
- Commercial Vehicle Tyres
- Agricultural Equipment Tyres
- Cycle and Motorcyle Tyres
- Industrial and Lift Truck Pneumatic Tyres
- Industrial and Lift Truck Solid Tyres
- Earthmoving Equipment Tyres
- Rims
- Rim/Valve Combination
- Valves
Available in:
- STANDARDS MANUAL 2011 Print Edition- CD-ROM 2011 - Licence for 1 user
- STANDARDS MANUAL 2011 CD-ROM 2010 - Licence for 2 to 5 users
- STANDARDS MANUAL 2011 CD-ROM 2011 - Licence for 6 and more users
JATMA Yearbook 2011: Tyre Standards (Japan Automobile Tyre Manufactures Associations)
The JATMA YEAR BOOK 2011 will be published next january, 2011.
This standard is mainly intended for standardization, simplification and unification of tyres for domestic market, to ensure its compatibility, and contribute to the rationalization of appropriate tyre production and use. JATMA Yearbook: Tyre Standards is the responsibility of the Tyre Standards Committee, mainly comprised of representatives of tyre makers, automakers, and related ministries and agencies in the Japanese government. The standards cover tyres, rims and valves in seven categories: passenger cars, light trucks, trucks and buses, off-road vehicles, agricultural equipment, industrial vehicles and motorcycles. The Japanese Ministry of Land, Infrastructure and Transport has incorporated JATMA’s Tyre Standards in its vehicle inspection procedures since 1982. Internationally, the standards rank as authoritative guidelines together with the ETRTO standards of Europe and TRA standards of the United States. The JATMA standards are also mentioned in the U.S. Department of Transportation’s Federal Motor Vehicle Safety Standards and are mutually recognized standards for tyres exported from Japan to
This standard is mainly intended for standardization, simplification and unification of tyres for domestic market, to ensure its compatibility, and contribute to the rationalization of appropriate tyre production and use. JATMA Yearbook: Tyre Standards is the responsibility of the Tyre Standards Committee, mainly comprised of representatives of tyre makers, automakers, and related ministries and agencies in the Japanese government. The standards cover tyres, rims and valves in seven categories: passenger cars, light trucks, trucks and buses, off-road vehicles, agricultural equipment, industrial vehicles and motorcycles. The Japanese Ministry of Land, Infrastructure and Transport has incorporated JATMA’s Tyre Standards in its vehicle inspection procedures since 1982. Internationally, the standards rank as authoritative guidelines together with the ETRTO standards of Europe and TRA standards of the United States. The JATMA standards are also mentioned in the U.S. Department of Transportation’s Federal Motor Vehicle Safety Standards and are mutually recognized standards for tyres exported from Japan to
Canada and Australia.
Available in:
- Booklet (English Version)
- CD-ROM ((English Version)
Available in:
- Booklet (English Version)
- CD-ROM ((English Version)
---------------------------------------------------------------------------------
If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.
If you would like to request an invoice, please send us an email message.
We’re always ready to help you out.
Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.
Estamos sempre prontos a ajudá-los.
If you need any additional assistance, please do not hesitate to contact us with any questions or concerns.
If you would like to request an invoice, please send us an email message.
We’re always ready to help you out.
---------------------------------------------------------------------------------
Caso necessite de qualquer assistência extra, por favor não hesite em nos contactar, com suas dúvidas ou preocupações. Caso deseje um orçamento, por favor envie-nos uma mensagem por e-mail.
Estamos sempre prontos a ajudá-los.
---------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
Wednesday, November 24, 2010
A Física dos Explosivos Nucleares; [G. Barroso, Dalton Ellery]; 2009 (In Portuguese)
Editora: Livraria da Física
Área FÍSICA NUCLEAR
Idioma PORTUGUÊS
Número de páginas 439
Edição 2009
ISBN 9788578610166
EAN 9788578610166
Este livro trata de temas essenciais à compreensão da física dos explosivos nucleares. Elaborado com base em atividade científica estritamente acadêmica, destina-se aos que desejam conhecer mais profundamente a teoria e processos físicos envolvidos nas explosões nucleares.
Os principais tópicos abordados são neutrônica e criticalidade (transporte de nêutrons); hidrodinâmica e termodinâmica a altas temperaturas e densidades; plasmas densos e pesados; opacidade e transporte da radiaçãotérmica; teoria hidrodinâmica das detonações químicas; ondas de choque, compressão dinâmica de sólidos , implosões; estatística das reações de fissão em cadeira; e fusão por confinamentos inercial (detonações termonucleares).
Três tipos de explosivos são analisados: os explosivos de fissão pura. as denominadas "bombas boosted" (com introdução de deutério-trítio no interior da massa físsil) e os explosivos termonucleares. Resultados de simulações numéricas e computacionais complexas (muitos dos quais presumivelmente jamais tenham sido publicados na literatura científica aberta) são apresentados e discutidos.
“The Physics of Nuclear Explosives” (A Física dos Explosivos Nucleares) by Dalton E.G. Barroso provides a rather comprehensive account of the physical principles involved in nuclear detonations, including both fission and fusion weapons. There are chapters on reactor physics, radiation hydrodynamics, dynamic compression of solids, inertial confinement fusion, and more. Most of this information is already freely available to those who care to search for it. But the author has broken new ground in presenting the results of his numerical simulations of nuclear detonations and characterizations of particular weapons, such as the W-87 warhead.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
--------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
--------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Brazilian Fruits & Cultivated Exotics ( for consuming in natura); 2006; [Harri Lorenzi; Luis Bacher; Marco Lacerda; Sergio Sartori]
ISBN: 85-86714-24-0.| Harri Lorenzi; Luis Bacher; Marco Lacerda; Sergio Sartori |
| 2006 Characteristics: - Size 15.5 x 22.3 cm; - Hard cover, printed in full colors; - 389 species with two pictures per page; - 438 cultivars and natural forms, with two pictures per page, totaling 827 types of fruits; - 627 pages and 1,214 color pictures; - Totally printed in 115 g gloss couche paper; - Approximate weight: 1.8 kg. |
| Sinopse |
| This book is about the “fruits”, or the fruits and pseudofruits, which are consumed in natura by man, whole or in parts (skin, pulp or seed), even though they can be consumed with physical/chemical type of preparation.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646 E-mail: vendas@technospub.com.br E-mail: sac@technospub.com.br http://www.technospub.com.br http://www.facebook.com/Technospub http://www.twitter.com/Technospub http://technospub.blogspot.com.br
--------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
--------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
|
Brazil: A Traveler's Literary Companion (Traveler's Literary Companions) [Paperback] 2009
- Authors: Alexis Levitin (Editor), Gregory Rabassa (Foreword)
- Paperback: 256 pages
- Publisher: Whereabouts Press (January 13, 2009)
- Language: English
- ISBN-10: 1883513219
- ISBN-13: 978-1883513214
- Product Dimensions: 7.2 x 4.9 x 0.9 inches
- Shipping Weight: 8 ounces
- Price: $ 65.00
Alexis Levitin is a recipient of two NEA translation fellowships and two Fulbright Lectureships, as well as residencies at the Banff International Literary Translation Centre, The European Translators Collegium in Germany, and The Ford Foundation retreat at Bellagio, Italy. His translations have appeared in more than two hundred magazines, including Kenyon Review, New England Review, Partisan Review, Prairie Schooner, New Letters, and American Poetry Review.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
--------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
--------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Brazilian Trees, Volume 1 , 2 & 3. [Lorenzi, Harri]; (Volume 1; Volume 2, Volume 3)
BRAZILIAN TREES Vol. 1 A Guide to the Identification and Cultivation of Brazilian Native TreesISBN: 85-86714-17-8
LORENZI, HARRI
Ficha Técnica
Characteristics:
- Size 31 x 21 cm;
- Hard cover, printed in full colors;
- 2,112 color photographs (6 per page);
- 352 tree species (1 for each page);
- Total page numbers: 384, 352 of them in ful colors;
- Completely printed in 115 g gloss couche paper;
- Approximate weight: 1.9 kg.
Sinopse
This book is the result of ten years of studies, research, and of work with seed harvesting and preparation, seedling production and reforestation with native forest species. Its purpose is to popularize the knowledge on our tree species and provide guidance concerning their cultivation.
The present work also intends to provide subsidies to the easy identification of plants by means of the use of photographs of their main identifying components, regardless of the need to refer to a descriptive text reading. Only information which could not be presented in photographs was described, such as plant height, trunk diameter, leaf texture, etc.
Each species, totalizing 352, is presented in a sole page, 6 photographs and written information are included.
BRAZILIAN TREES Vol. 2 A Guide to the Identification and Cultivation of Brazilian Native Trees
ISBN: 85-86714-15-1
LORENZI, HARRI Ficha Técnica
Characteristics:
- Size 31 x 21 cm;
- Hard cover, printed in full colors;
- 2,112 color photographs (6 per page);
- 352 tree species (1 for each page);
- Total page numbers: 384, 352 of them in ful colors;
- Completely printed in 115 g gloss couche paper;
- Approximate weight: 1.9 kg.
Sinopse
This book is the result of more than 15 years of studies, research and work with native trees. It is a sequence to the book Brazilian Trees, first published in 1992 and now being published in an updated edition, which will be called “Volume 1”. It contains the same number of species as the former, however including mainly rare species threatened with extinction, besides showing the same graphic design and composition, as well as presenting the same alphabetical order per family, genus and species.
Each species, totalizing 352, is presented in a sole page, 6 photographs and written information are included. The photographs are presented in the following order: left upper side – adult plant; right upper side – detail of leaf or inflorescence; lower part of left side, to right side – fruit, seeds, trunk and wood.
BRAZILIAN TREES Vol. 3 A Guide to the Identification and Cultivation of Brazilian Native Trees
| ISBN: 85-86714-34-4 LORENZI, HARRI |
| Ficha Técnica: |
| Characteristics: - Size 31 x 21 cm; - Hard cover, printed in full colors; - 2,112 color photographs (6 per page); - 352 tree species (1 for each page); - Total page numbers: 384, 352 of them in ful colors; - Completely printed in 115 g gloss couche paper; - Approximate weight: 1.9 kg. |
Sinopse
This book is a continuation of the series Brazilian Trees, volumes 1 and 2; the first was published in 1992, the second in 1998; both were brought up to date in later printings. Volume 3 contains the same number of species descriptions as in each of the first two volumes (352) and follows the same format. Nevertheless, the present volume deals almost exclusively with rare and little-known trees, in as much as the more common or more easily found trees comprise the first two volumes. The three volumes together provide descriptions of 1,056 native Brazilian trees.
This is a luxurious book on Brazilian trees in the 21 x 31 cm format, with 384 pages, having full color images of habit, flowering branch closeup, fruits, seeds, bark and wood, of 352 Brazilian native species. Also contains written information of the morphological characteristics of each plant, its phenology, natural occurrence, seed gathering and preparation procedures, and seedling production.
Entre em contato e Solicite seu orçamento:
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Para maiores informações:
Tuesday, November 23, 2010
Association of American Railroads : AAR Open Top Loading Rules Manual - Complete Set 1-7 ( 2007 )
The content of the Open Top Loading Rules Manual is advanced by the AAR Open Top Loading Rules Committee and is issued by authority of AAR’s Safety and Operations. The entire manual is comprised of seven books. Each has a specific focus and application covering industry requirements and procedures for loading and securing various commodities on open top railcar, as well as open top trailers and containers that are to be loaded on railcar for transport.
Following is a brief description of each section:
The Open Top Loading Rules are comprised of seven volumes:
Section 1
General Rules Governing Loading of Commodities on Open Top Cars. Contains general rules and guidelines applicable to all commodities shipped on open top railcars in interchange service. This includes procedures for open top load testing and rule changes, party responsibilities, minimum requirements, and guidance on setting up multicar and dimensional load shipments. Also included are lists of various approved tie-down and securement materials as well as specifications, performance standards, and test procedures for gaining product approval. This section is to be used in conjunction with Sections 2 through 6.
Section 2
Rules Governing Loading of Steel Products Including Pipe on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for all steel products including unprocessed, structural, fabricated (except machinery), scrap, raw metals as well as steel and iron pipe. This section is to be used in conjunction with Section 1.
Section 3
Rules Governing Loading of Heavy Equipment, Vehicles, and Farm Machinery on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications and block patterns for farm equipment, vehicles, and machinery such as tractors, combines, heavy equipment, and other implements used in road grading/making, excavating, etc. This section is to be used in conjunction with Section 1.
Section 4
Rules Governing Loading of Miscellaneous Commodities, Including Machinery on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for such commodities as cranes, nonmetallic pipe, tanks, transformers, boilers, locomotives, car bodies, etc. This section is to be used in conjunction with Section 1.
Section 5
Rules Governing Loading of Forest Products, Including Miscellaneous Building Materials, on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for wood commodities like lumber, logs, poles, pulpwood, certain panel products, and fabricated products such as lamin ated beams, veneer lumber, etc. Also included are miscellaneous building materials such as gypsum, hardboard, cellulose
board, and styrene sheets. This section is to be used in conjunction with Section 1.
Section 6
Rules Governing Loading of Military Vehicles and Materiel on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for military vehicles, equipment, and materiel. This includes armored tanks and similar vehicles, trucks, artillery, pontoons, cranes, road building and materiel handling equipment such as forklifts. This section is to be used in conjunction with Section 1.
Section 7
Rules Governing Loading of Commodities on Open Top Trailers and Containers for Rail Transport. This is the only stand-alone section of the manual. In the front portion of the section are the General Rules (see description for Section No. 1) applicable to all commodities shipped on open top trailers and containers that are to be transported on railcars in interchange service. Also incorporated are loading figures that include drawings of approved load designs and patterns for various commodities with securement specifications.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
---------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
Following is a brief description of each section:
The Open Top Loading Rules are comprised of seven volumes:
Section 1
General Rules Governing Loading of Commodities on Open Top Cars. Contains general rules and guidelines applicable to all commodities shipped on open top railcars in interchange service. This includes procedures for open top load testing and rule changes, party responsibilities, minimum requirements, and guidance on setting up multicar and dimensional load shipments. Also included are lists of various approved tie-down and securement materials as well as specifications, performance standards, and test procedures for gaining product approval. This section is to be used in conjunction with Sections 2 through 6.
Section 2
Rules Governing Loading of Steel Products Including Pipe on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for all steel products including unprocessed, structural, fabricated (except machinery), scrap, raw metals as well as steel and iron pipe. This section is to be used in conjunction with Section 1.
Section 3
Rules Governing Loading of Heavy Equipment, Vehicles, and Farm Machinery on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications and block patterns for farm equipment, vehicles, and machinery such as tractors, combines, heavy equipment, and other implements used in road grading/making, excavating, etc. This section is to be used in conjunction with Section 1.
Section 4
Rules Governing Loading of Miscellaneous Commodities, Including Machinery on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for such commodities as cranes, nonmetallic pipe, tanks, transformers, boilers, locomotives, car bodies, etc. This section is to be used in conjunction with Section 1.
Section 5
Rules Governing Loading of Forest Products, Including Miscellaneous Building Materials, on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for wood commodities like lumber, logs, poles, pulpwood, certain panel products, and fabricated products such as lamin ated beams, veneer lumber, etc. Also included are miscellaneous building materials such as gypsum, hardboard, cellulose
board, and styrene sheets. This section is to be used in conjunction with Section 1.
Section 6
Rules Governing Loading of Military Vehicles and Materiel on Open Top Cars. Contains approved loading figures (load patterns) with securement specifications for military vehicles, equipment, and materiel. This includes armored tanks and similar vehicles, trucks, artillery, pontoons, cranes, road building and materiel handling equipment such as forklifts. This section is to be used in conjunction with Section 1.
Section 7
Rules Governing Loading of Commodities on Open Top Trailers and Containers for Rail Transport. This is the only stand-alone section of the manual. In the front portion of the section are the General Rules (see description for Section No. 1) applicable to all commodities shipped on open top trailers and containers that are to be transported on railcars in interchange service. Also incorporated are loading figures that include drawings of approved load designs and patterns for various commodities with securement specifications.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
---------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
---------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
Friday, November 19, 2010
British Pharmacopoeia 2011
Order NOW - legally effective from 1 January 2011
- Author:
- British Pharmacopoeia Commission
- Publisher:
- TSO (The Stationery Office)
Containing 51 new monographs for formulated preparations, and additional standards for widely used unlicensed formulations, the British Phamacopoeia (BP) 2011 edition becomes legally effective from 1 January 2011, so place your order now.
The BP is the leading global collection of standards for UK medicinal products and pharmaceutical substances. Produced by the British Pharmacopoeia Commission Secretariat of the Medicines and Healthcare products Regulatory Agency, the BP makes a valuable contribution to public health by setting publicly available standards for the quality of medicines.
Used in almost 100 countries, the BP remains an essential reference for all individuals and organisations working within pharmaceutical research and development, manufacture, and testing across the globe.
Clearly laid out sections include monographs that set out the mandatory standards for active substances, excipients, formulated preparations, blood-related products, immunological products, radiopharmaceutical preparations, surgical materials, herbal and complementary medicines; together with supporting General Notices, test methods, infrared spectra and supplementary information.
European Pharmacopoeia monographs are clearly distinguished and cross-referenced while a full index assures easy access to the current legally binding UK standards.
The British Pharmacopoeia 2011 package
To provide you with a truly flexible resource, this edition includes:
- Six printed volumes, (volume 3 has been split for ease of reference), including a single volume of the BP (Veterinary) 2011
- An online version via www.pharmacopoeia.co.uk (single-user licence) that can also be accessed via your iPhone® or iPad™
- Three free online updates in January, April and July to harmonise BP with the European Pharmacopoeia
- European Pharmacopoeia 6th edition material up to, and including Supplement 6.8
- A fully linked and searchable CD-ROM (single-user licence)
Online access and CD-ROM
Following registration using an ID code supplied with the printed version, a single user licence to BP online will be granted. There is also the option to request the comprehensive and fully searchable CD version.
Maximise your access
For organisations that have several people wishing to access vital information from BP 2011 simultaneously, cost effective network licences are available. Please call 01603 696701 for more details and pricing.
iPhone® is a registered trademark of Apple Inc. iPad™ is a trademark of Apple Inc.
| Extent | N/A | ISBN | 9780113228492 |
|---|---|---|---|
| Size | A4 | Price | On Request |
| Binding | Hardback (six volume boxed set) | Published | 18 Aug 2010 |
| Availability | Availability | Delivery | Delivery options and charges |
Tuesday, November 16, 2010
Arquivos Brasileiros de Cardiologia
ISSN 0066-782X printed version
ISSN 1678-4170 online version
Mission
- To publish articles on cardiovascular topics, including new investigations, clinical or surgical experiments, or other original contributions.
- Publicar artículos sobre temas cardiovasculares, abarcando nuevas investigaciones, experiencias clínicas o quirúrgicas u otras contribuciones originales.
- Publicar artigos sobre temas cardiovasculares, abrangendo novas investigações, experiências clínicas ou cirúrgicas ou outras contribuições originais.
The journal Arquivos Brasileiros de Cardiologia is the monthly publication of the Sociedade Brasileira de Cardiologia (Brazilian Society of Cardiology) since 1948.
The journal publishes articles on cardiovascular topics, including new investigations, clinical or surgical experiments, or other original contributions.
Its abbreviated title is Arq. Bras. Cardiol., which should be used in bibliographies, footnotes and bibliographical references and strips.
Informações para Assinatura / Subscription Information:
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Revista Brasileira de Zootecnia (RBZ) - Brazilian Journal of Animal Science (BJAS)
Brazilian Journal of Animal Science is a monthly publication.
Mission:
To publish the results of original research in the Zootechny.
Publicar os resultados de pesquisas originais na área de Zootecnia.
Publicar los resultados de investigaciones originales en Zootecnia.
The Sociedade Brasileira de Zootecnia (SBZ), founded on 26 July 1951, in Piracicaba, São Paulo, is a nonprofit association.
The Society, which congregates professionals related to the Animal Science area, meets since 1972. The Annual Meeting of the SBZ is a scientific event in which the most recent advances in the area of Animal Science are presented.
The SBZ publishes, every month period, the Revista Brasileira de Zootecnia (RBZ), located in the Department of Animal Science of the Universidade Federal de Viçosa, in Viçosa-Minas Gerais, and that is destined to the dissemination of original scientific works, unpublished, resulting from research linked to the areas of Aquiculture; Forage crops; Breeding, Genetic and Reproduction; Monogastrics; Animal Production; Ruminants; and Production Systems and Agribusiness.
Its abbreviated title is R. Bras. Zootec., that should be utilized in bibliographies, footnotes, references and bibliographic strips.
Informações para Assinatura / Subscription Information:
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
To publish the results of original research in the Zootechny.
Publicar os resultados de pesquisas originais na área de Zootecnia.
Publicar los resultados de investigaciones originales en Zootecnia.
The Sociedade Brasileira de Zootecnia (SBZ), founded on 26 July 1951, in Piracicaba, São Paulo, is a nonprofit association.
The Society, which congregates professionals related to the Animal Science area, meets since 1972. The Annual Meeting of the SBZ is a scientific event in which the most recent advances in the area of Animal Science are presented.
The SBZ publishes, every month period, the Revista Brasileira de Zootecnia (RBZ), located in the Department of Animal Science of the Universidade Federal de Viçosa, in Viçosa-Minas Gerais, and that is destined to the dissemination of original scientific works, unpublished, resulting from research linked to the areas of Aquiculture; Forage crops; Breeding, Genetic and Reproduction; Monogastrics; Animal Production; Ruminants; and Production Systems and Agribusiness.
Its abbreviated title is R. Bras. Zootec., that should be utilized in bibliographies, footnotes, references and bibliographic strips.
Informações para Assinatura / Subscription Information:
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
The Brazilian journal of infectious diseases : an official publication of the Brazilian Society of Infectious Diseases Vol 15 / 2011
Vol 15 / 2011
ISSN 1413-8670 printed versionISSN 1678-4391 online version
Country: Brazil
Subject Area: Medicine
Subject Category: Microbiology (medical)
Publisher: Contexto. Publication type: Journals. ISSN: 14138670, 16784391
Mission
- To publish relevant documents in the area of microbiology, infection and immune response to infectious agents.
- Publicar documentos relevantes en el area de la microbiologia, infección y de la imuno respuesta a los agentes infecciosos.
- Publicar documentos relevantes nas áreas de microbiologia, infecção e resposta imune aos agentes infecciosos.
The Brazilian Journal of Infectious Diseases is, since 1997, an official publication of the Brazilian Society of Infectious Diseases and is the responsible to publish original publications in the area of infectious diseases. Communications published in theBJID are to be relevant in the broadest sense to all aspects of microbiology, infection and immune response to infectious agents.
Its abbreviated title is Braz. j. infect. dis, which should be used in bibliographies, footnotes and bibliographical references and strips.
O Brazilian Journal of Infectious Diseases (BJID) é a revista oficial da Sociedade Brasileira de Infectologia. Foi criado com o intuito de fornecer à comunidade científica brasileira um veículo para a publicação e ampla disseminação de pesquisas no campo das doenças infecciosas e parasitárias. Os artigos e comunicações publicados pelo BJID têm relevância em todos os aspectos da microbiologia, infectologia e resposta imunológica aos agentes infecciosos.
A periodicidade do BJID é bimestral e a revista destina-se à publicação de artigos originais, apresentados dentro das seguintes categorias de comunicação: investigação clínica; apresentação e discussão do caso; relatórios sumários sobre novos métodos e observações; apresentações e revisões recentes; cartas ao editor referentes a publicações anteriores; comentários ao editor – exposição de idéias, teorias e comentários.
Informações para Assinatura / Subscription Information:
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
World Sugar Yearbook 72nd edition 2011
Published December 2010 Now in its 72nd edition, F.O. Licht's World Sugar Yearbook is the ESSENTIAL reference manual for the global sugar and sweetener industries. Fully researched and updated each year, no other publication offers all of the vital contacts, vital facts, figures and statistics to cover this global industry.
The 72nd edition includes the following content: - Exclusive, fully researched, industry information, complete with facts, figures and statistics provided by F O Licht.
- Sugar Economics report, Machine Industry update, and Agriculture sections
- Suppliers’ Product Reports.
- Contact details of more than 4,000 companies, including refineries, factories, institutes, organisations and associations.
- 120 page Sugar Production Statistics Supplement.
- Buyer’s Guide Listing
- Equipment Suppliers Address Section.
World Sugar Yearbook 2011 contains:- World directory of the sugar industry and international organisations.
- Company product reports.
- Sugar industry buyer's guide and address section.
- Articles on sugar economics and agriculture by leading industry experts.
PLUS Additional Supplement: World Sugar Statistics - 120 pages of statistics and articles for all data concerning the global sugar industry.
Why you should purchase World Sugar Yearbook...- Access key global players in your industry saving you time and creating future opportunities
- Identify areas for development and investment with a detailed review of sugar statistics from 2010
- Spot trends with expert advice on how the market will perform in 2011 and beyond.
- Company product reports.
- Sugar industry buyer's guide and address section.
- Articles on sugar economics and agriculture by leading industry experts.
PLUS Additional Supplement: World Sugar Statistics - 120 pages of statistics and articles for all data concerning the global sugar industry.
Why you should purchase World Sugar Yearbook...- Access key global players in your industry saving you time and creating future opportunities
- Identify areas for development and investment with a detailed review of sugar statistics from 2010
- Spot trends with expert advice on how the market will perform in 2011 and beyond.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Friday, November 12, 2010
Heat Exchange Institute (HEI) : Complete Set of Standards
Heat Exchange Institute (HEI): Complete Set of Standards 2014, Print Edition
Standards for Closed Feedwater Heaters : 8th Edition, 2009
The eighth edition of these standards has been developed by the Closed Feedwater Heater Section of the Heat Exchange Institute, Inc. The technical information in these standards combines present industry standards, typical Purchaser requirements, and Manufacturer’s experience. In addition, the standards outline the important design criteria for closed feedwater heaters. These standards provide practical information on nomenclature, dimensions, testing, and performance. Use of the standards will ensure a minimum of misunderstanding between Manufacturer and Purchaser, and will assist in the proper selection of equipment best suited to the requirements of the application. Some of the new material incorporated into the eighth edition of these standards include new information on drains and vents for heaters. A new schematic piping arrangement for feedwater heaters has been added as well. Variables and values in Paragraph 3.14.3, Sample Problem for Determining Resultant Force and Moment, have been revised. A revised Fig. No. 11a & 11b, Standard Tolerances for Nozzle and Support Locations, has been included. Information on high pressure, full access channels has been added as Paragraph 8.1.2, accompanied by a new drawing.
In preparation of this standard, consideration has been given to the work of other organizations, such as the American Society of Mechanical Engineers, the American Society of Testing Materials, the former Feedwater Heater Manufacturers Association, the Tubular Exchanger Manufacturers Association, and others. Credit is hereby given to all those whose standards may have been helpful in this work.
Performance Standards for Liquid Ring Vacuum Pumps: 3rd Edition, 2005
The Third Edition of the Performance Standard for Liquid Ring Vacuum Pumps presents industry standards and factory test methods. Definitions and nomenclature for liquid ring vacuum pumps are included along with design specifications, operating variables, correction factors, and figures that describe single and/or two-stage flat port plates, conical ports, and test set-ups for vacuum pump performance. Like all HEI standards, there is an appendix for conversion of English to SI units.
Standards and Typical Specifications for Tray Type Deaerators: 8th Edition, 2008
The Eighth Edition of Standards and Typical Specifications for Tray Type Deaerators contains practical information on the design, construction, and operation of tray type deaerators. It is intended to serve as a guide for individuals who design, specify, purchase, and use tray type deaerators. A useful troubleshooting guide is included as well as informative appendices to provide commonly used information such as head capacities, tank capacities, properties of saturated steam, friction and velocity charts, and pipe data. An important section deals with construction standards, code requirements, design and engineering of valves and nozzles, storage tank sizing, and accessory selection.
Standards for Direct Contact Barometric and Low Level Condensers: 8th Edition, 2010
Provides practical information on nomenclature, definitions, dimensions, construction, and testing of this equipment. A section on condenser performance includes topics on design, types of duty, loading, types of service, and air-vapor relationships. An engineering section deals with inlet and outlet sizing, piping, and pressure drop. The installation portion of the standard covers head and lift requirements, heights, auxiliary hardware arrangements, and relief valve sizing.
Standards for Steam Surface Condensers : 10th Edition, 2006
The Tenth Edition of the “Standards for Steam Surface Condensers” represents another step in the Heat Exchange Institute’s continuing program to provide Standards that reflect the latest technological advancement in the field of condensing equipment.
The Tenth Edition of “Standards for Steam Surface Condensers” has incorporated all information from the 9th Edition of Steam Surface Condensers as well as the Addendum to the 9th Edition. Also included in the 10th Edition is a new Table 3, which provides tube material and gauge correction factors. A sample thermal calculation has been added as Section 4.2.6. Table 6, entitled Materials for Condenser Tubes, has been updated and revised. Section 6.5.1.8 has been added to give users an example of sizing venting equipment as stated in Table 9. Section 7.0, Atmospheric Relief Devices, has been completely rewritten and updated. Information on clad tubesheets and condenser support systems has been incorporated into Section 8.0 of the standard. Section 9.0 has been expanded to include information on dimensional tolerances, shipping and site storage, field installation, erection superintendent duties, and post erection walk down. Appendix A has been completely revised from the previous edition. Appendix D has been updated, providing information on the procedure for calculating allowable nozzle external forces and moments in cylindrical vessels. Two new appendices, Appendix G and Appendix H, have been added to the 10th Edition. Appendix G is a troubleshooting guide that has been added to assist operators of steam surface condensers, and Appendix H is a newly developed HEI surface condenser data sheet.
Standards for Steam Jet Vacuum Systems: 6th Edition, 2007
The Fifth Edition of Standards for Steam Jet Vacuum Systems builds on the Fourth Edition's integration and update of three previous HEI documents: Standards for Jet Ejectors, Standards for Field Testing, and Construction Standards for Steam Jet Ejector Components. In addition to describing equipment types, the document covers nomenclature, operating principles, terminology and design specifications (including suction, discharge and utility conditions). The standard contains not only performance requirements, but also construction standards such as materials, welding, quality assurance, shipping, structural design, hydrostatic testing and tolerances. A section on troubleshooting and additional information on operational characteristics have been added to assist users in understanding the equipment.
Standards for Power Plant Heat Exchangers : 4th Edition, 2004
Combines present industry standards, typical purchaser requirements, and manufacturers' experience in outlining the important design criteria for power plant heat exchangers. Topics pertinent to power plant heat exchanger include materials of construction, tube-to-tubesheet welds, temperature efficiency curves, and typical shell requirements. This edition incorporates revised or expanded sections on fouling and cleanliness factor, baffles and support plates, and expansion joints. Information has been added on tube side pressure loss, cathodic protection, and SI unit tolerances. Also, new: SI and MKH specification sheets, a table of thermal conductivity, and a heat exchanger troubleshooting guide.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Burle Marx : Jardins e ecologia ; 2009 ; [ISBN: 9788577560585]
Edição: 2
Encadernação: Brochura
Idiomas: Português
Número de páginas: 124
Formato: 27 X 29 cm.
Lombada: 1,4
Peso: 870 gramas
Uma viagem pelos ecossistemas brasileiros por meio de belíssimas fotografias das espécies que encantaram Roberto Burle Marx e que foram matéria-prima de seu primoroso trabalho como paisagista.
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Modernidade verde : Jardins de Burle Marx ; (Guilherme Mazza Dourado); 2009 ; [ISBN: 9788573598575]
Edição: 1
Número de páginas: 388
Encadernação: Brochura
Idioma: Portugues
Formato: 18,5 X 25,5 cm.
Lombada: 2,3
Peso: 1,110 kilos
Esse livro faz uma consistente recapitulação da história do paisagismo no Brasil, retomando seu desenvolvimento desde o século XIX e estabelecendo relações entre essa disciplina e a condição econômica e cultural do país. O autor situa o trabalho de Burle Marx na fase central de sua maturidade profissional, compreendendo dos primeiros jardins públicos, no Recife (1935-1937), até a implantação do Parque do Flamengo, no Rio de Janeiro (1961-1965). Prêmio Design do Museu Casa Brasileira - Trabalhos Escritos Publicados
Entre em contato e Solicite seu orçamento:
Technos Publicações
Tel. 55-11-3714-1646
E-mail: vendas@technospub.com.br
E-mail: sac@technospub.com.br
http://www.technospub.com.br
http://www.facebook.com/Technospub
http://www.twitter.com/Technospub
http://technospub.blogspot.com.br
----------------------------------------------------------------------------------
Authorized Subscription Agency - Booksellers - Information Consultant
----------------------------------------------------------------------------------
Tem alguma questão adicional? - Sinta-se livre em contactar-nos.
We being an International Company, we can search all kinds of publications, print or electronic, from any part of the world. Our experience takes us back to 1971.
Subscribe to:
Posts (Atom)